Revised June 25, 2019 - Lists of Steel, Aluminum and Other Goods Imported from the U.S. Subject to Remission of Countermeasures

Background

In response to the U.S. tariffs on Canadian steel and aluminum, the Government of Canada applied reciprocal countermeasures as of July 1, 2018 on imports of steel, aluminum and other goods from the U.S. Canada stood firm and did not back down until an understanding was reached with the U.S. on May 17, 2019.  As part of that understanding, the U.S. and Canada removed their tariffs and countermeasures, as announced on May 20, 2019.

To protect the competitiveness of businesses affected by Canadian countermeasures while they were applied, the Government announced that:

The goods currently covered in Schedule 1, Schedule 2, Schedule 3 and Schedule 4 of the United States Surtax Remission Order (the "Remission Order") are listed below. 

  • For goods in Schedule 1, relief is granted for steel and aluminum products imported from the U.S. on or after July 1, 2018. 
  • For goods in Schedule 2, relief is granted for a period from July 1, 2018 to May 20, 2019 for steel and aluminum products imported from the U.S.
  • For goods in Schedule 3, relief is granted for steel and aluminum products imported from the U.S. This relief is limited to specifically listed importers, for specified periods and subject to applicable conditions as prescribed in Schedule 3.
  • For goods in Schedule 4, relief is granted for an indefinite period for other goods imported from the U.S. on or after July 1, 2018, subject to applicable conditions, as provided in the Remission Order. 

The latest changes to the Remission Order were made pursuant to the Order Amending the United States Surtax Remission Order, No. 2019-2 and entered into force on June 25, 2019. The changes to the Remission Order are denoted in bold in the Schedules below and consist of:

  • amendments to items 14 to 17, 25, 26, 28, 31, 34, 35, 40, 41, 47 to 49, 52, 83, 104, 115, 120, 121, 138, 144, 146, 150, 155, 156, 158 and 160 of Schedule 1;
  • the addition of items 169 to 394 to Schedule 1;
  • amendments to items 8, 28 to 31, 34, 44 and 45 of Schedule 2;
  • the addition of items 47 to 62 to Schedule 2;
  • amendments to items 14, 109 to 115, 159, 162, 168, 172, 174 to 176, 178, 179, 183, 184, 233, 234, 283, 292, 296 and 310 of Schedule 3;
  • the addition of items 315 to 380 to Schedule 3; and
  • the addition of items 7 to 11 to Schedule 4.

Note: The electronic versions of the Schedules of the Remission Order are provided for reference only. In case of discrepancy, the Schedules of the Remission Order as published in the Canada Gazette, Part II prevail.

Schedule 1 of the Remission Order
Item Description of Goods
1 semi-finished product of cold-rolled annealed spring steel of grade SAE 1095
2 flat-rolled product, of a width of 600 mm or more, not further worked than hot-rolled, pickled, of grade ASTM A1039 (500LA), of a nominal thickness of 0.039 inch
3 flat-rolled product of grade HPS 70 W
4 flat-rolled product for production of large diameter line pipe of grade X65 or X70 (API 5L)
5 flat-rolled product, not further worked than cold-rolled, in coils, of Martensitic grades
6 flat-rolled product, batch annealed tin plate
7 flat-rolled product of iron, non-alloy or other alloy steel, electrogalvanized
8 flat-rolled product, galvanized, of grade TRIP TRC400Y/690T, of a width of 600 mm or more, of a thickness of 0.057 inch or more
9 flat-rolled product, galvannealed, of grade ASTM A653/HSLA 050XK, of a width of 70 inches
10 flat-rolled product, with aluminized coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401
11 flat-rolled product of iron, non-alloy or other alloy steel, aluminized
12 flat-rolled product, not further worked than cold-rolled, of specification MS-264-060XK
13 flat-rolled product, not further worked than cold-rolled, of grade C1010 SAEJ403, of tensile strength from 70,000 to 84,000 psi inclusive, of elongation on 2 inches of 3%, of a minimum yield strength of 65,000 psi
14 Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width of more than 8 inches to 12 inches inclusive
15 Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width of more than 10 inches to 12 inches inclusive
16 Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width of more than 10 inches to 12 inches inclusive
17 Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width of more than 10 inches to 12 inches inclusive
18 semi-finished product or bar and rod, of ductile cast iron of grade 65-45-12
19 bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 197 HBW and maximum 237 HBW, of a minimum tensile strength of 95,000 psi, of a minimum yield strength of 75,000 psi, of a diameter of up to 12 inches inclusive
20 bar and rod, of grade 4140, vacuum degassed, of hardness of minimum of 205 HBW and maximum of 237 HBW, of a minimum tensile strength of 100,000 psi, of a minimum yield strength of 80,000 psi, of a diameter of up to 12 inches inclusive
21 bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 237 HBW,  of a minimum tensile strength of 115,000 psi, of a minimum yield strength of 100,000 psi, of a diameter of up to 12 inches inclusive
22 bar and rod, of grade 4140 or 4145, vacuum degassed, of hardness of minimum of 253 HBW, of a minimum tensile strength of 125,000 psi, of a minimum yield strength of 110,000 psi, of a diameter of up to 12 inches inclusive
23 bar and rod, of grade 4140, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 34 RC or of a minimum yield strength of up to 130,000 psi
24 bar and rod, of grade 4340, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 36 RC or of a minimum yield strength of up to 140,000 psi
25 Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or more than 7 inches to 12 inches inclusive
26 Bar and rod, of grade 8620, of a diameter of more than 7 inches to 12 inches inclusive
27 bar and rod, of proprietary grade SW85, of a diameter from 4.0625 to 12 inches inclusive
28 Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches to 12 inches inclusive
29 bar and rod, of iron or non-alloy steel, nitrocarburized or oxidized, of a minimum yield strength of 75,000 psi, of maximum surface finish of 16 RMS
30 bar and rod, of iron or non-alloy steel, of grade ASTM A108, of a diameter of more than 4 inches
31 Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi inclusive
32 standard I sections S of 3 inches by 5.7 inches, of specification ASTM A529 Grade 50
33 bar and rod, hot-rolled, in irregularly wound coils, of stainless steel, of grade 17-7, 201, 208Lsi, 302, 302HQ, 304, 304L, 305, 308L, 309L, 309Lsi, 310, 314, 316, 316L, 316Lsi, 321, 327, 409, 409NB, 410, 420, 430, 430L or 450
34 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of grade A286, 13-8, 15-5, 15-5 PH, 17-4, 17-4 PH, 201, 303, 303Se, 304, 304L, 316, 316L, 321, 327, 347, 409, 410, 420, 430, 450, AMS Custom 465 or 2304
35 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 15-5 PH, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or 465
36 bar and rod, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450, of a diameter of less than 8 inches
37 bar and rod, of stainless steel, chrome plated
38 angle, shape and section, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450
39 wire of stainless steel, hot-rolled and annealed, soap coated, of type 304L, of a diameter of 0.312 inch
40 Wire of stainless steel, nickel coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm
41 Wire of stainless steel, nickel coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm
42 flat-rolled product, of grade Mangabraze
43 flat-rolled product, aluminized, of specification GMW2M-ST-S-CR5-T1M-120
44 bar and rod, of grade 4715, vacuum degassed, of hardness of minimum 56 HRC and maximum 62 HRC, of a minimum tensile strength of 119,000 psi, of a minimum yield strength of 95,000 psi, of a diameter of up to 7 inches
45 bar and rod of grade 1522CV
46 bar and rod of alloy Aermet 100
47 Bar and rod, of proprietary grade Finkl Steel FX-Xtra, of a diameter of up to 16 inches
48 Bar and rod, of proprietary grade Finkl Steel MLQ (mold lens quality) P20
49 Bar and rod, of proprietary grade Finkl Steel MD or MDI (mold quality steel) P20
50 bar and rod of proprietary grade Microtec 4M95
51 bar and rod of proprietary grade Impact 7
52 Bar and rod, not further worked than cold-formed or cold-finished, of grade 5140H
53 W-section beams
54 chrome silicon spring wire
55 wire of chrome silicon valve quality
56 pipe and tube, drawn over mandrel (DOM) of specification SP-TU-001
57 pipe and tube, drawn over mandrel (DOM) of specification ASTM A513 Type 5
58 pipe and tube, cold drawn, seamless
59 pipe and tube, seamless, cold drawn of specification SP-TU-009
60 pipe and tube, seamless, hot-rolled of specification SP-TU-002
61 pipe and tube, hot finished seamless pressure tubing, of grade 1026, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
62 pipe and tube, hot finished seamless pressure tubing, of grade 4130, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
63 pipe and tube, hot finished seamless pressure tubing, of grade 4140, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
64 pipe and tube, hot finished seamless pressure tubing, of proprietary grade Impact 7, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
65 coiled tubing, of an outside diameter from 0.75 inch to 3.5 inches inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch inclusive, of a kind used in drilling for oil or gas
66 pipe and tube, of iron, non-alloy or other alloy steel, aluminized
67 pipe and tube, of circular, square, rectangular or other non-circular cross section, of iron, non-alloy steel, alloy steel or stainless steel, in-line galvanized
68 pipe and tube, welded, of grade 4140, of circular cross-section
69 pipe and tube, welded, of grade 4142, of circular cross-section
70 pipe and tube, straight seam, electric resistance welded, of circular cross-section of an outside diameter of more than 16 inches up to 20 inches inclusive, of a wall thickness of up to 0.625 inches, of grade CSA G40.21
71 pipe and tube, electric resistance welded (ERW) drawn over mandrel (DOM) of any specification
72 pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.125 inch, of outside diameter of 0.405 inch
73 pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.25 inch (6.35 mm), of outside diameter of 0.540 inch
74 pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.375 inch, of outside diameter of 0.675 inch
75 coiled tubing, of other alloy steel, of an outside diameter from 0.75 inch to 3.5 inch inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch
76 pipe and tube, of square section, of a cross-sectional dimension of more than 12 inches up to 16 inches inclusive
77 pipe and tube, straight seam, electric resistance welded, of square and equivalent rectangular sections, of dimensions of more than 12 inches by 12 inches up to 16 inches by 16 inches inclusive, of thickness of up to 0.625 inch, of grade CSA G40.21, ASTM A252 or ASTM A500
78 pipe and tube, straight seam, electric resistance welded, of square section, of dimension of 1.5 inch by 1.5 inch, of a thickness of  0.25 inch, of grade CSA G40.21, ASTM A252 or ASTM A500
79 pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 1526
80 pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 4130
81 aluminum plate, sheet and strip, of alloy AA3002, AA3003, AA3004, AA3104, AA3105, AA3105-H12, AA3105-H24, AA5005, AA5052, AA5083, AA5086, AA5182, AA5205, AA5251, AA5454, AA5657, AA5754, AA6005A, AA6014, AA6016, AA6061, AA6083, AA6111, AA6181A/AA6005A or AA6451, of a thickness from 0.2 mm to 9.2 mm inclusive
82 aluminum composite material consisting of aluminum sheets bonded by a thermoplastic core
83 Aluminum cans of a size from 89 ml to 1000 ml
84 flat-rolled product, not further worked than hot-rolled, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm
85 flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 420LA, of specification SAE2340, of a minimum thickness from 0.055 inch to 0.066 inch inclusive
86 flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 500LA, of specification GMW3032M-ST-S, of a minimum thickness of 0.045 inch
87 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.06 inch, of a width of 51.9 inches or 56.5 inches
88 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.066 inch, of a width of 53.1 inches
89 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.047 inch or 0.058 inch
90 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a nominal thickness of 0.063 inch, of a width of 48.475 inches
91 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.066 inch, of a width of 50.9 inches
92 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.067 inch, of a width of 47.4 inches or 53.2 inches
93 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.044 inch to 0.06 inch inclusive
94 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a nominal thickness of 0.063 inch or 0.064 inch
95 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.067 inch, of a width of 55.916 inches
96 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.073 inch, of a width of 59.186 inches
97 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.075 inch, of a width of 54.3, 54.67, 55.5 or 56.5 inches
98 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.067 inch, of a width of 50.8 inches
99 flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.066 inch, of a width of 52.423 or 54.2 inches
100 flat-rolled product, not further worked than hot-rolled, of grade Ympress 100XF, of a thickness of 0.5 inches, of a width of 60 inches, of a length of 120 inches
101 flat-rolled product, not further worked than cold-rolled, of grade CR420LA, of specification GMW3032M-ST-S, of a thickness of 0.08 inches or more
102 flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0566 inch, of a width of 45.863 inches
103 flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0606 inch, of a width of 46.3 inches
104 Flat-rolled product, in coils, not further worked than cold-rolled, of grade 1074, of a thickness from 0.032 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive
105 flat-rolled product, galvanized, of specification HR-550-610-LA-S-G160/60 U, of a nominal thickness of less than 2.0 mm
106 flat-rolled product, galvanized, of specification GMW3023M-ST-S-HR550LA, of a nominal thickness of less than 2.0 mm
107 flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch
108 flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.0667, 0.067, 0.073, 0.074 or 0.0743 inch
109 flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches
110 flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches
111 cold-rolled and hot dipped steel substrate coil, of Grade 50 or 80, of specification ASTM A792, plated or coated with aluminum-zinc alloys, of a thickness of 3.81 mm, of a width of 1041.4 mm
112 flat-rolled product, aluminum-silicon coated, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm
113 flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade SA516 Gr 70 normalized, of a thickness of 4.5 inches, of a width of less than 600 mm
114 flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 10B2, of a nominal thickness of 0.12 inch, of a width of 3.65 or 5.2 inches
115 Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive
116 flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade C1050 or C1075, of specification ASTM A682 or A684, of a thickness of 0.0098 inch or more
117 flat-rolled product of iron or non-alloy steel, nickel and brass coated or plated by an electro-plating process, of a width of less than 600 mm
118 bar and rod, hot-rolled, of grade A105, A350, 1018, 1030, 1040, 1045, 1050 or 1055, vacuum degassed, of a diameter from 2.5 inches to 10 inches inclusive
119 bar and rod, of grade A36, of a thickness of 1.5 inches, of a width of 1.625 inches, of a length of 5.5 inches
120 Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 70,000 psi
121 Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive
122 cold drawn bar, of grade 1018, of a diameter from 4.5 inches to 5.75 inches inclusive, of specification ASTM A108
123 cold drawn bar, of grade 1144, of a diameter from 2.5 inches to 4.5 inches inclusive, of specification ASTM A311, of a minimum yield strength of 100,000 psi
124 bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020, 1022, 10B22 or 8620, of a diameter from 0.468 inches to 1.46 inches inclusive
125 nitrated round bar, of grade C1045, of minimum yield strength of up to 100,000 psi
126 wire, in coil, of grade AISI 10B35, silicon killed, with phosphate and polymer coating, of a diameter of 1.156 inches
127 wire of iron or non-alloy steel, electro-galvanized
128 flat-rolled product of stainless steel, electro-galvanized, coated with ethylene propylene diene monomer (EPDM), of a thickness from 0.015 to 0.025 inches inclusive, of a width from 1.265 to 1.796 inches inclusive
129 flat-rolled product, of stainless steel, of a width of less than 600 mm, of any grade of the 300 Series
130 rod or wire, of stainless steel, of grade 302, 304 SS, 316, 410 or 410 SS,  of specification ASTM A493 or A555,  annealed, soap coated, of a diameter from 0.2 inch to 0.672 inch inclusive
131 flat-rolled product, hot-rolled, heat treated, of grade 4142, of a thickness from 0.25 inch to 12 inches
132 flat-rolled product of other alloy steel, cold-rolled, galvanized, of specification 50002-LAC550Y620T G160/60 U,  of a width of 600 mm or more
133 flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch
134 flat-rolled product, galvanized, of grade HSLA 60, of a minimum thickness of 0.085 inch, of a width of 57.15 inches
135 flat-rolled product, galvanized, of grade HSLA 80,  of a minimum thickness of 0.066, 0.073 or 0.074 inch
136 flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches
137 flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches
138 Flat-rolled product, rough machined and rotary ground, of grade O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm
139 flat-rolled product, rough machine and rotary ground, of grade M4, M2 or T15, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm
140 flat-rolled product of other alloy steel, cold-rolled, spheroidized and annealed, of grade 4140 or SAE J404 4130, of a thickness from 2.9 mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive
141 flat-rolled product of other alloy steel, not further worked than cold-rolled, of grade ASTM A980 M160 Martinsite (MART), of a width of 7.375 inches, with electrogalvanized coating 40G/40G
142 flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13, 1V, 3V, 4V, 9V, 10V or 15V, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm
143 flat-rolled product of other alloy steel, galvanized, of specification MS 50002-LAC550Y620T G160/60U, of a thickness of 2.1 mm, of a width of 228.6 mm
144 High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, M7, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive
145 bars and rods of other alloy steel, not further worked than hot-rolled, of alloy 4130, 4140, 4145, 4150, 4320, 4340, 52100, 8620, 8630, 8640 or 9310, vacuum degassed, fine grain, with a section size from  2.5 inches to 10 inches inclusive
146 Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade O-1, O6, A2, D2, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 inch to 24 inches inclusive
147 centrifugal cast tube, of alloy SL96L, of an outside diameter of 13 inches, of an inside diameter of 12.625 inches, of a length of 58.56 inches or 65.25 inches
148 mechanical tubing, of grade 4140, of an outside diameter from 6 inches to 10 inches inclusive, of an inside diameter from 4 inches to 8 inches inclusive, of a wall thickness from 1 inch to 2 inches inclusive
149 hollow profile, of stainless steel, of specification ASTM A511
150 Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347
151 tube, cold drawn, stress relieved and annealed, of grade AISI 4140 or 8630, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive
152 tube, seamless, spray metal (SM), of grade AISI 4140 or 8630, of an outside diameter from 1.22  inches to 2.162 inches inclusive, of an inside diameter from 0.851 inch to 1.29 inches inclusive
153 tube, seamless, quenched and tempered, cold drawn, of grade AISI 4130 or 4140, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive
154 tube, welded, of circular cross-section, electrical metallic tubing, conforming to standard UL 797
155 Hydraulic tube, of grade J525 1008 or 1010, specification of ASTM SA/214, of an outside diameter from 0.125 inch to 1.5 inches inclusive, of a minimum yield strength of 25,000 psi
156 Tube, welded, of stainless steel, of a circular cross-section, of an outside diameter of up to 4.5 inches inclusive
157 tube, drawn over mandrel (DOM), of square or rectangular cross-section, of grade C1010 or C1026
158 Tube, welded, of stainless steel, of square or rectangular cross-section, of specification ASTM A240
159 aluminum strip, of grade 5052 H32/34, coated with thermoplastic polyolefin (TPO) and ethylene propylene diene monomer (EPDM), of a thickness of 0.024 inch
160 Geodesic dome for storage tanks, of aluminum, of a diameter from 20 feet to 125 feet
161 aluminum coil, of alloy AA3105, painted or coated, of a thickness of 0.019 inch, of a width from 13 inches to 24 inches inclusive
162 fuel tank, of aluminum, of 43 or 55 gallon, of dimensions of 62 inches by 20 inches by 24 inches, with inner poly fuel cell, with a black powder coat finish
163 aluminum horseshoes
164 aluminum bar, rod, tube or profile, of alloy 6105-T5, of a diameter of 3 inches, of a length of 15, 20 or 25 feet
165 round stainless steel wire, of grade 302 or 304, of a diameter from 0.178 mm to 1.092 mm, nickel coated
166 rectangular stainless steel wire, of grade 304, of a dimension of 6.35 mm by a dimension of 0.457 mm, nickel coated
167 square or rectangular stainless steel wire, of grade 301 or 631, of a dimension from 0.089 mm to 18.128 mm by a dimension from 0.305 mm to 5.08 mm, soap coated
168 tube, welded, of circular cross-section, electrical rigid metal conduit, conforming to standard UL 6
169 Flat-rolled product, rough machined and rotary ground, of grade 4140 or 4142, of a thickness from 0.25 inch to less than 5 inches, of a width greater than 600 mm
170 Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, L6, or H13, of a diameter of 0.125 inches to 12 inches inclusive
171 Hot-rolled annealed plate, of grade 4140, of a thickness from 0.25 inch to 12 inches, of a width of more than 24 inches
172 Alloy steel plate, not in coils, not further worked than hot rolled, of a thickness of 0.25 inch or more, of a width of 23.62 inches or more, of grade 4140 or 4142
173 Flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled, with patterns in relief, of specification ASTM A786, of a thickness of 0.075 inch, of a width of 60 inches
174 Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils,  of specification UMG 1035 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.126 inch inclusive
175 Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1050 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.122 inch inclusive
176 Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of grade 60 class 2B, of specification ASTM A1011, of a thickness from 0.063 inch to less than 0.066 inch, of a width of up to 46.975 inches
177 Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 340XF, of a thickness from 0.056 inch to less than 0.058 inch, of a width of up to 55.51 inches
178 Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 380XF, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 57.3 inches 
179 Flat-rolled product, of iron or non-alloy steel, hot-rolled, picked and oiled, in coils, of specification SAE J1392 050XF, of a width of 600 mm or more, of a thickness of 0.0551 inch to 0.063 inch inclusive
180 High carbon flat-rolled product, hot-rolled, pickled and oiled, of grade 1050, of a width of less than 600 mm, of a thickness from 0.056 inch to 0.26 inch inclusive
181 Flat-rolled product, of grade 1055/1065, hot-rolled, aluminum killed, one pass (cold-rolled) annealed, of a thickness of 0.22 inch to 0.307 inch (+/- 0.012 inch) inclusive, of a width of 5 inches to 6 inches  (+/- 0.020 inch) inclusive
182 Flat-rolled product, of iron or non-alloy steel, hot-rolled, in coils,  of specification UMG 1050 spheroidized and annealed, of a width from 12.85 inches to 23.6 inches, of a thickness from 0.0984 inch to 0.122 inch inclusive
183 Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of grade CMS-18 or grade CMS-19
184 Flat-rolled product, of grade 4142, of a width from 926 mm to 971 mm inclusive
185 Flat-rolled product of high speed steel, of a width of less than 600 mm, of proprietary grade Micro-Melt Maxamet, of a thickness from 0.25 inch to 0.458 inch inclusive
186 Flat-rolled product, of grade 4130, hot-rolled, annealed, of a thickness from 0.157 inch to 0.276 inch (+/-0.007 inch) inclusive, of a width of 2.972 inches to 7.886 inches ( +/- 0.02 inch) inclusive
187 Flat-rolled product, of grade 8620, hot-rolled, annealed, of a thickness of 0.348 inch ( +/- 0.01 inch), of a width of 5.788 inches (+/-0.02 inch)
188 Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of proprietary grade NiMark 300 Hi temperature alloy, of a thickness from 0.25 inch to 0.458 inch inclusive
189 Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of proprietary grade Carpenter CTS XHP, of a thickness from 0.108 inch to 0.32 inch inclusive, of a width of 4 inches to 20 inches inclusive
190 Flat-rolled product, dual phased steel, in coils, of specification GMW3399M-ST-S-CR590T/340Y-DP-UNCOATED-U, of a width from 1,361 mm to 1,500 mm inclusive, of a thickness of 1.1 mm or 1.2 mm
191 Flat-rolled product, in coils, cold-rolled, of specification GMW3032M-ST-S-CR420LA, of a thickness of 1.2 mm (+/- 0.06 mm), of a width of 645.414 mm
192 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of specification SAE J2340 420XF, of a thickness from 0.052 inch to 0.058 inch inclusive, of a width of up to 50.625 inches
193 Flat-rolled products of iron or non-alloy steel, in coils, cold-rolled, of specification HSLA SAE J2340 420XF, of a thickness from 0.057 inch to 0.061 inches inclusive, of a width of up to 53.525 inches
194 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 50.775 inches
195 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.0295 to 0.035 inches inclusive, of a width of up to 56.475 inches 
196 Flat-rolled product, in coils, cold-rolled, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm (+/- 0.06 mm)
197 Flat rolled product of iron or non-alloy steel, of grade C1022, C1045, C1055, C1060, C1067, C1070, C1074 or C1095, annealed, of specification ASTM A682 or A684, of a thickness of more than 0.0098 inch, of a width of less than 23.625 inches, not clad, plated or coated, not further worked than cold-rolled (cold-reduced)
198 High carbon flat-rolled product, of grade 1095, of a width of less than 600mm, of a thickness from 0.0098 inches to 0.255 inches inclusive, not further worked than cold-rolled
199 Flat-rolled product, of grade 1020, cold-rolled, annealed, of a thickness of 0.1595 inch (+/- 0.0015 inch), of a width from 7.663 inches to 8.926 inches ( +/- 0.02 inch) inclusive
200 Flat-rolled product, of grade 1050, cold-rolled, annealed, of a thickness of 0.157 inch (+/- 0.003 inch), of a width of 4.925 inches (+/- 0.02 inch)
201 Flat-rolled product, of grade 1018 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.048 to 0.2155 inch (+/- 0.002 inch) inclusive, of a width from 2 inches to 9.32 inches (+/- 0.02 inch) inclusive
202 Flat-rolled product, of grade 1018 SK (silicon killed), cold-rolled, annealed, of a thickness of 0.079 inch to 0.174 inch (+/- 0.002 inch) inclusive, of a width of 1.53 inches to 5.8 inches ( +/- 0.01 inch) inclusive
203 Flat-rolled product, of grade 1020 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.222 inch (+/- 0.002 inch), of a width of 3.4 inches  ( +/- 0.01 inch)
204 Flat-rolled product, of grade 10B21, cold-rolled, annealed,  of a thickness of 0.104 inch to 0.196 inch (+/- 0.006 inch) inclusive, of a width of 1.938 inches to 5.976 inches (+/- 0.02  inch) inclusive
205 Flat-rolled product of other alloy steel, cold-rolled, of specification high strength-SAE J2340, of grade 380XF CR, of a width of 600 mm or more, of a thickness from 0.045 inch to 0.049 inch inclusive
206 Flat-rolled product,  in coils, of specification 4142 HR, of a width from 36.481 inches to 38.211 inches inclusive, of a thickness from 0.1795 inch to 0.2415 inch inclusive
207 Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), of proprietary grade Hiperco 50 Alloy, of a thickness from 0.001 inch to 0.385 inch inclusive
208 Flat-rolled product, of grade 4130, cold-rolled, annealed, of a thickness of 0.069 inch to 0.236 inch (+/- 0.006 inch) inclusive, of a width of 1.4 inches to 11.108 inches ( +/- 0.02 inch) inclsuive
209 Flat-rolled product, of grade 4140, cold-rolled, annealed , of a thickness of 0.118 inch to 0.236 inch (+/- 0.002 inch), of a width of 3.22 inches to 5.551 inches (+/- 0.02 inch)
210 Flat-rolled product, of grade 8620 or 8620 H, cold-rolled, annealed, of a thickness of 0.093 inch to 0.348 inch (+/-0.002  inch) inclusive, of a width of 2.808 inches to 7.360 inches (+/-0.02 inch) inclusive
211 Flat-rolled product,  cold-rolled, in coils, of specification TSG3100G SPC980DU-T, of a thickness from 0.037 inch to 0.041 inch inclusive, of a width of up to 52.285 inches
212 Flat-rolled product, of grade 8620, hot-rolled and one pass (cold-rolled), annealed, of a thickness of 0.315 inch (+/- 0.004 inch), of a width of 5.35 inches  ( +/-0.02 inch)
213 Flat-rolled product, of zinc-aluminum-magnesium alloy, of registered trademark ZAM, in coils, of specification ASTM-A1046/A1046M, MSM-CC-DZC 90 or MSM-CE-DZC 120, of a thickness of 0.02 inch to 0.2 inch inclusive, of a width of 32 inches or more
214 Flat-rolled product of iron or non-alloy steel,  galvanized, of specification ASTM A653 SS, of grade 080 G90, of a thickness from 0.044 inch to 0.061 inch inclusive, of a width from 50.655 inches to 55.655 inches inclusive
215 Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401
216 Bar and rod, of ductile cast iron of grade 80-55-06
217 Bar and rod, of gray iron or ductile iron continuous cast, of grade 100-760-02, G-2 (class 40 gray iron) or 201-NI-RESIS
218
Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020 or 1022, of a diameter from 1.25 inches to 1.47 inches inclusive
219
Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1045, 10B21 or 8620, of a diameter of more than 1 inch to 1.47 inches inclusive
220 Bar and rod, not further worked than cold-formed or cold-finished, of grade 1045 or 1050, of a minimum yield strength of 100,000 psi, of specification ASTM A-311, of a diameter from more than 3 inches to 12 inches inclusive
221 Bar and rod, hot-rolled, in irregularly wound coils, of silico-manganese steel, of grade 300M, of diameter of more than 0.765 inch to 12 inches inclusive
222 Bar and rod, of silico-manganese steel, of grade 300M–HS, of a diameter from more than 4.062 inches to 12 inches inclusive
223 Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from more than 4.062 inches to 12 inches inclusive
224 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 4.75 inches
225 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of  5 inches, 8 inches or 8.75 inches 
226 Round bar of alloy steel, of AISI grade E8720Ca4 or E9313-15MCa4, calcium treated, electric furnace forged, vacuum degassed, not further worked than hot-rolled, hot-drawn or extruded, of specifications ASTM A255, ASTM E45 or European Standard EN 10204
227 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade M-50 or 4330V, of a diameter from 0.5 inch to 12 inches inclusive
228 Bar, of grade SAE 4340, of specification AMS 6414, of a diameter of up to 12 inches inclusive, vacuum remelted, of a kind used in aerospace application
229 Bar, of grade SAE 52100, vacuum remelted, of specification AMS 6440 or AMS 6444, of a kind used in aerospace application
230 Bar, of grade AISI 440C, of specification AMS 5618, electrode vacuum remelted, of a kind used in aerospace application
231 Bar, of grade M50, of specification AMS 6491, vacuum melted and remelted, of a kind used in aerospace application
232 Bar, of grade M50Nil, of specification AMS 6278, vacuum melted and remelted, of a kind used in aerospace application
233 Bar and rod, of other alloy or non-alloy steel, not further worked than cold-formed or cold-finished, of proprietary grade Premomax or Biodur Carpenter CCM alloy, of a diameter from 1 inch to 12 inches inclusive
234 Bar, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 4140 or 8620, of a diameter from 1.25 inches to 1.5 inches inclusive, of a length of more than 24 feet to 40.2 feet inclusive
235 Tubes, pipes and hollow profiles, seamless, of stainless steel, of circular cross-section, of grades 15-15LC Mod hollow bar or 15-15HS max hollow bar, of an inside diameter from 2 inches to 10 inches inclusive 
236 Pipe and tube, seamless, of grade 4130, 4130M, 4140, 4140Ca4 or 4145, of an outside diameter of up to 3 inches inclusive, of a wall thickness of up to 0.5 inch inclusive
237 Electric fusion welded carbon pipe, of specification ASTM A672, of grade C70, of outside diameter of 28 inches, of an inside diameter of 26.5 inches, of a wall thickness of 0.75 inches
238 Line pipe of a kind used for oil or gas pipeline, drawn over mandrel (DOM), of grade 1026, of an outside diameter of 3 inches, of an inside diameter of 1.75 inches or 2.375 inches
239 Line pipe of a kind used for oil or gas pipeline, of grade 1026, of an outside diameter of 3.63 inches, of an inside diameter of 3 inches
240 Tube, welded, of grade AISI 1026, of an outside diameter of 1.9 inches, of a wall thickness of 0.4 inch
241 Tube, welded, of grade AISI 1526, of an outside diameter from 1.05 inches to 1.9 inches inclusive, of a wall thickness from 0.225 inch to 0.34 inch
242 Tube, welded, of grade AISI 4140, of an outside diameter of 1.778 or 1.784 inches, of an inside diameter of 1.322 inches or 1.328 inches
243 Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.312 inch, of a wall thickness of 0.03 inches
244 Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.25 inch, of a wall thickness of 0.035 inch
245 Pipe and tube, of stainless steel, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
246 Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 mm to 6 mm inclusive, of a diameter from 20 mm to 40 mm inclusive
247 Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
248 Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
249 Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches  by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
250 Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
251 Carbon steel welding wire, of trademark NS-115 CopperFree, of a diameter of 0.035 inch to 0.062 inch inclusive, of specification CSA W48-14 B-G49A 3 C1 S6
252 Wire, of mild steel, not clad, of a diameter of 1 mm, of specification AWS A5.18/A5.18M or CSA W48.14
253 Oil tempered Class 2 spring wire, of a diameter of more than 0.531 inch
254 Rub rail of alloy steel, hot-rolled, of grade A529-50, of a height of 2.5 inches, of a width of 0.375 inch, of a length of 24 feet
255 Hot-rolled structural steel coil, of grade 36 Type 1, of specification ASTM A1011, of a nominal thickness of 0.059 inch, of a width of 59.5 inches
256 High Carbon steel flat bar, cold-rolled, annealed, of grade 4340, of a thickness of 0.282 inches, of a width of 1 inch
257 Hot-rolled round bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a diameter of 0.562 inch to 0.748 inch inclusive
258 Hot-rolled flat bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a thickness from 0.187 inch to 0.236 inch, of a width from 0.499 inch to 1.250 inches  inclusive,
259 Bar of other alloy steel, of specification AMS 5743J or AM-355, water quenched heat treat process, of a diameter of 5.125 inches, with a maximum cobalt content of 0.4% by weight
260 Bar, hot-rolled, of grade 5160H, of a diameter of 0.5625 inch, 0.59375 inch, 0.625 inch, 0.65625 inch, 0.6875 inch or 0.71875 inch
261 Bar, hot-rolled, turned and polished, of grade 5160H, of a diameter of 0.875 inch
262 Bar, hot-rolled, turned and polished, of grade 51B60H, of a diameter of 1.25 inch
263 Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class A coating, of a thickness from 0.05 inch to 0.25 inch inclusive
264 Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class B coating, of a thickness from 0.05 inch to 0.25 inch inclusive
265 Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class C coating, of a thickness from 0.05 inch to 0.25 inch inclusive
266 Wire of iron or non-alloy steel, of specification ASTM B341, plated with aluminum, of a thickness from 0.09 inch to 0.2 inch inclusive
267 Wire of stainless steel, nickel coated, of type 304, 304L, 316 or 631, of specification ASTM A313 or ASTM A580, of a diameter of up to 5.75 mm
268 Rebar, in irregularly wound coils, of stainless steel, of grade 2304 or 2205, of specification ASTM A-955, of a thickness from 0.375 inch to 1.75 inches inclusive , of a yield strength of 65,000 psi
269 Bar and rod, of stainless steel, hot-rolled, in irregularly wound coils, of grade 25NI-20CR-6MO or 22CR-13NI-5MIN, of specification type 304, type 304L or type 303, of a diameter from 0.12 inch to 0.75 inch inclusive
270 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade SCF 19 alloy, of a diameter from 3.5 inches to 10.5 inches inclusive
271 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-564 type 630
272 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-638 type 660
273 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-705 type XM-13 or ASME SA-705 type 630
274 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-479 type 304L
275 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-540, of grade B21, B22, B23 or B24
276 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASTM A434, of grade BD
277 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade project 70+ of specification type 304/304L Stainless or project 70+ of specification custom 630 (17CR-4NI), of a diameter from 3.25 inch to 10 inches inclusive
278 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade project 70+ 15CR-5NI stainless, of specification type 34700, type 416 or type 416 RS, of a diameter from 1 inch to 10.75 inches inclusive
279 Bar and rod, of stainless steel, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 431 or XM19, of a diameter from 1.25 inches to 1.5 inches inclusive
280 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished,  of grade 416, of specification ASTM A582, of a thickness from 0.375 inch to 5 inches inclusive
281 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 2205 or 2304
282 Tubes, pipes and hollow profiles, of stainless steel, of circular cross-section, of specification ASTM A-500 Grade C
283 Pipe and tube, welded, of stainless steel, of grade 18 Cr Cb, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
284 Pipe and tube, welded, of stainless steel, of  grade 439, of an outside diameter of up to 1 inch inclusive, of a wall thickness of up to 1.5 mm inclusive, of specification ASTM A554
285 Aluminum I-Beam, of alloy AA6061
286 Aluminum bars, rods and profiles, of any alloy of the 7000 series
287 Aluminum bars, rods, profiles or castings, of aluminum bronze alloy, of specification ASME SB-271, of type C95400
288 Aluminum plates, sheets and strip, of alloy AA1350, AA2024, AA 2124, AA2198, AA2219, AA2324, AA2524, AA5052, AA6013 or AA6061
289 Aluminum plates, sheets and strip, of any alloy of the 5000 series (including alloy 5052), of temper H32, H32P or H242, of a thickness exceeding 0.2 mm but less than 7 mm
290 Aluminum plates, sheets and strip, of any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7085, 7140, 7150, 7175, 7474 or 7475)
291 Aluminum plates, sheets and strip, pre-painted, of grade 3003 or 5052, of temper H14, H32, or H34
292 Aluminum plates, sheets and strip, in coils, of alloy 5042, of temper H2E72 or H25, coated
293 Aluminum plates, sheets and strip, in coils, of alloy 5352, of temper H2E77, coated
294 Aluminum plates, sheets and strip, in coils, of alloy 5042 or 5182, of temper H48, coated
295 Aluminum reservoirs, tanks, vats and similar containers,  of alloy AA5052, of a diameter of 12 inches
296 Aluminum collapsible tubular container, of alloy 1070, whether or not lined or heat-insulated, of a diameter of up to 2 inches inclusive, of a length of up to 8 inches inclusive
297 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade Custom 465, of specification AMS 5936, of a diameter of up to 8 inches
298 Flat-rolled product, of grade SA 516-70, HIC resistant, vacuum degassed, of a thickness of more than 0.375 inch
299 Flat-rolled product of iron or non-alloy steel, clad plated or coated with vitreous enamel, of a thickness of more than 0.375 inch
300 Flat-rolled product of iron or non-alloy steel, electrogalvanized, zinc-nickel coated, HY 100, vacuum degassed, HIC resistant, of a thickness of more than 0.375 inch
301 Flat-rolled product, of grade SA 516-70, clad, plated or coated with SA 240-317L stainless steel, of a thickness of more than 0.375 inch
302 Flat-rolled product, Chromoly steel, of grade SA 387-11 Class 2, of a thickness of more than 0.375 inch
303 Semi-finished product of other alloy steel, in ingots and other primary forms, of grades Aermet 100, 4340, CBS50NIL, 52100 or INVAR 36 Alloy, of a diameter from 1 inch to less than 8 inches
304 Ingots, of other alloy steel, of specification Electro-Slag Remelting (ESR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ, SDQ, SXQ, 420M, DRX or XFS, of a diameter from 40 inches to 49 inches inclusive
305 Ingots, of other alloy steel, of specification Vacuum Arc Remelting (VAR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ ,SDQ, SXQ , 420M, DRX or XFS, of a diameter from 40 inches to 49 inches
306 Semi-finished product of stainless steel, in ingots or other primary forms, of grade 15-15HS MAX, 15-15HS or 15-5, of specification Carpenter Stainless type 15CR-5NI, Carpenter13-8 Stainless type 410 or Custom 630 (17CR-4NI) Stainless, of a diameter from 3.5 inches to less than 8 inches
307 Semi-finished product of stainless steel, of rectangular (other than square) cross-section, of grade A286, Carpenter custom 465 Stainless or Custom 450 Stainless, of specification type 17-4 or type 17-5, of a width from 7.5 inches to less than 8 inches
308 Semi-finished product of stainless steel, in ingots or other primary forms, of grade 440C, Pyromet 355 High temperature alloy, 15-15LC MOD or Carpenter Disk Quality VAR 15-5, of a diameter from 1 inch to less than 8 inches
309 Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.059 inch to less than 0.071 inch, of a width of up to 20 inches, of a length of up to 120 inches
310 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of 3.89 mm
311 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive
312 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.1573 inch to 0.181 inch inclusive, of a width of 5.325 inches
313 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of 0.69 mm to 3.3 mm inclusive, of a width from 170 mm to 248 mm inclusive
314 Pipe and tube, straight seam, electric resistance welded, of circular cross-section, of grade 1008 or 1010 steel, Galfan coated or copper plated, of specification ASTM A513, SAE J356 or SAE J526, of an outside diameter from 0.157 inch to 1.375 inches inclusive, of a wall thickness from 0.02 inches to 0.083 inches inclusive
315 Flat-rolled product, of iron or non-alloy steel, in coils, galvanized, of specification ASTM A653 SS Grade 80 Class 2, of a thickness from 0.057 inch to 0.07 inch
316 Semi-finished bar, of ductile cast iron, of grade 60-40-18, annealed,  of specification ASTM A-395 
317 Flat-rolled product, hot-rolled, in coils, of grade HSLA 60, of a thickness from 0.05 inch to 0.063 inch inclusive
318 Flat-rolled product, hot-rolled, in coils, of grade HSLA 70, of a thickness from 0.05 inch to 0.063 inch inclusive
319 Flat-rolled product, hot-rolled, in coils, of grade HSLA 80, of a thickness from 0.05 inch to 0.063 inch inclusive
320 Flat-rolled product, cold-rolled, in coils, of grade HSLA 60, of a thickness from 0.02 inch to 0.105 inch inclusive
321 Flat-rolled product, cold-rolled, in coils, of grade HSLA 70, of a thickness from 0.02 inch to 0.105 inch inclusive
322 Flat-rolled product, cold-rolled, in coils, of grade HSLA 80, of a thickness from 0.02 inch to 0.105 inch inclusive
323 Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0395 inch, of a width of 65.25 inches
324 Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0396 inch, of a width of 68.875 inches
325 Flat-rolled product, cold-rolled, in coils, of grade 4130, of a thickness of 0.075 inch, of a width of 3 inches
326 Flat-rolled product, cold-rolled, in coils, of grade 1075, of a thickness of 0.134 inch, of a width of 1.437 inches
327 Flat-rolled product, cold-rolled, in coils, of grade 1050, of a thickness of 0.125 inch, of a width of 2.5 inches
328 Flat-rolled product, cold-rolled, in coils, of grade 1074, of a thickness of 0.074 inch, of a width of 3.5 inches
329 Round stainless steel wire, of grade 302, 304 or 316, of a diameter of more than 6.5 mm
330 Square or rectangular stainless steel wire, of grade 301, 302, 304 or 631, of more than 0.787 square mm in maximum solid cross-sectional area
331 Aluminum plates, sheets and strip, of alloy 1100, of any alloy of the 5000 series or of any alloy of the 6000 series
332 Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification AMS 6260S
333 Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification ASTM A108 – Level 3 or ASTM A304-11, of a diameter of more than 3.5 inches
334 Vacuum Insulated Tubing (VIT), seamless, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
335 Vacuum Insulated Tubing (VIT), Electric Resistance Welded, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
336 Pipe and tube, of iron or non-alloy steel, seamless, of grade 1026, of specification ASTM A 519, of an outside diameter of 10 inches, of a wall thickness of 0.5 inch
337 Tube, of other alloy steel, cold-drawn, seamless, of grade 4130, of specification AMS 6360, of a diameter of 0.75 inch or 1 inch, of a wall thickness of 0.035 inch or 0.156 inch
338 Pipe, of carbon steel Grade B Type E, with a polymer lining of PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy), of a diameter of 1 inch to 12 inches inclusive
339 Round bar of stainless steel, of grade 317L, alloy 20 or alloy 2205
340 Carbon wire,  in coils, plastic or nylon coated, cold-formed, conforming to standard ASTM F963-07
341 Plain end seamless casing, of a kind used to drill and operate gas storage caverns, of an outside diameter of 13.375 inches, of a torque of 79.67 lbs-ft or 91.25 lbs-ft, of specification P110 HC PSL-1
342 Flat-rolled product, of specification GMW3032M-ST-S CR180B2 U, of a nominal thickness of 1.5 mm
343 Flat rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade J2340 490XF, of a minimum thickness of 0.046 inch, of a width from 48 inches to 51 inches inclusive
344 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 490XF, of a minimum thickness of 0.055 inch, of a width of 55.51 inches.
345 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a thickness from 0.055 inch to 0.065 inch, of a width from 40 inches to 52 inches
346 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a minimum thickness of 0.068 inch, of a width of 54.675 inches
347 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 420XF, of a minimum thickness of 0.059 inch, of a width of 54.375 inches
348 Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a thickness from 0.154 inch to 0.157 inch, of a width from 36 inches to 39 inches inclusive
349 Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch
350 Flat-rolled product, in coils, cold-rolled, of grade 060 HSLA, of a thickness of 3 mm, of a width of up to 160 mm
351 Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR180B2, of a thickness of 0.0394 inch or 0.75 mm
352 Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR420LA, of a thickness of 0.0378 inch or 0.8 mm (+/- 0.05 mm)
353 Flat-rolled prodyuct, cold-rolled, of specification GMW3032-ST-S-CR550 MPA, of a thickness of 0.0472 inch
354 Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR590T/340Y, of a thickness of 0.0241 inch or 0.95 mm
355 Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR690T/550Y, of a thickness of 0.045 inch
356 Flat-rolled product, cold-rolled, of specification MS.50002 LAC420Y480T, of a thickness of 1.7 mm (+/- 0.07 mm)
357 Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 4130, of a minimum thickness from 0.059 inch to 0.197 inch
358 Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a minimum thickness of 0.0394 inch, of a width of 53.328 inches
359 Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR420, of a minimum thickness of 0.0433 inch, of a width of 49.575 inches
360 Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/700Y, of a thickness from 0.055 inch to 0.075 inch, of a width from 31 inches to 46 inches inclusive
361  Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a thickness of 0.0591 inch, of a width of 43.839 inches
362 Flat-rolled product of non-alloy steel, cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a minimum thickness of 0.114 inch, of a width from 36 inches to 39 inches inclusive
363 Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 490XF, of a minimum thickness of 0.035 inch, of a width of 48.4 inches
364 Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0213 inch, of a width of 51.375 inches
365 Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0236 inch, of a width of 51.375 inches
366 Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, in coils, containing by weight 0.19% of carbon, of specification M190 Martinsite steel, of a thickness from 0.4 mm to 0.6 mm
367 Flat-rolled product of iron or non-alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), in coils, of specification S50-260x431000 SAE J403-1050 or S50-260x355000 SAE J403-1050, of a thickness from 2.5mm to 2.7mm inclusive
368 Flat-rolled product, of iron or non-alloy steel, cold-rolled, annealed, of grade 40 modified, of a thickness of 1.5 mm
369 Flat-rolled product, of iron or non-alloy steel, in coils, of grade SAE J403 1055, of a thickness from 1.1 mm to 2.2 mm, of a width from 86 mm to 146 mm inclusive
370 Flat-rolled product, of other alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/550Y, of a minimum thickness of 0.049 inch, of a width from 33 inches to 59 inches inclusive
371 Flat-roll product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches
372 Flat-rolled product, in coils, cold-rolled, of grade 4130, spheroidized, of a thickness of 2.5 mm, 2.9 mm or 3.5 mm, of a width from 47 mm to 153 mm inclusive
373 Flat-rolled product, in coils, cold-rolled, of grade SAE J404 4130, of a thickness from 2.5 mm to 4 mm inclusive, of a width from 47 mm to 270 mm inclusive
374 Flat-rolled product, cold-rolled, annealed, in coils, of grade 4140 or 4142, containing by weight 0.15% or less of chromium, containing by weight 0.05% or less of molybdenum, containing by weight 0.6% to 1.65% of manganese, of a thickness of 1.7 mm (+/- 0.08 mm), of a width from 101.5 mm to 480 mm (+/- 0.5 mm)
375 Flat-rolled product, of non-alloy steel, hot-rolled, plated or coated with zinc, of grade J1392 Gr70YF or J2340 490YF, of a thickness from 0.068 inch to 0.122 inch inclusive
376 Flat-rolled product, cold-rolled, in coils, nickel, brass or copper electroplated, of grade ASTM 1008, of a thickness of 0.008 inch to 0.03 inch
377 Aluminum collapsible tubular container, annealed, with exterior and interior coating, produced by an impact extrusion process
378 Aluminum aerosol container, annealed, with exterior and interior coating, produced by an impact extrusion process
379 Flat-rolled product, cold-rolled, of specification GMW3032M CR180B2, of a nominal thickness of 0.0472 inch
380 Flat-rolled product, cold-rolled, of specification GMW3032M CR210B2, of a minimum thickness of 0.081 inch
381 Flat-rolled product, cold-rolled, of specification GMW3032M CR270B2, of a minimum thickness of 0.057 inch
382 Flat-rolled product, cold-rolled, of specification GMW3399M CR780T/420Y, of a nominal thickness of 0.0787 inch
383 Flat-rolled product, cold-rolled, of specification J404 4130, of a nominal thickness of 0.118 inch or 0.194 inch
384 Flat-rolled product, cold-rolled, of specification J404 4130, of a minimum thickness of 0.059 inch, 0.138 inch or 0.1575 inch
385 Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR180B2, of a minimum thickness of 0.0307 inch
386 Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR340LA, of a minimum thickness of 0.03 inch
387 Flat-rolled product, galvanized, of specification J2340 420XF, of a minimum thickness of 0.083 inch
388 Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.039 inch
389 Flat-rolled product, hot-rolled, of specification J2340 420 XF, of a minimum thickness of 0.051 inch
390 Flat-rolled product, hot-rolled, of specification J403 1037 modified, of a minimum thickness of 0.055 inch, 0.059 inch or 0.066 inch
391 Flat-rolled product, hot-rolled, pickled and oiled, of specification A606 Type 4 Corten, of a minimum thickness of 0.058 inch
392 Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 490XF, of a minimum thickness of 0.073 inch or 0.075 inch
393 Flat-rolled product, hot-rolled, pickled and oiled, of specification GMW3032M HR550LA, of a minimum thickness of 0.078 inch
394 Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 550 XF, of a minimum thickness of 0.065 inch, 0.07 inch or 0.075 inch or of a nominal thickness of 0.061 inch
Schedule 2 of the Remission Order
Item Description of Goods
1 flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches
2 flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130
3 flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095
4 flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21
5 flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches
6 flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches
7 flat-rolled product, annealed spring steel of grade C1070 CR
8 Repealed
9 flat-rolled product, cold-rolled, of AISI 1055 carbon steel
10 flat-rolled product, cold-rolled, annealed strip steel, of grade C1050
11 bar and rod of grade AISI 52100
12 I-section beams of iron or non-alloy steel
13 unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel
14 angle, shape and section, MC channels of a depth exceeding 3 inches
15 angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft
16 bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450
17 flat-rolled product, clad, plated or coated, of grade 4140
18 flat-rolled product, clad, plated or coated, of grade 4142
19 bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425
20 pipe and tube, seamless, of grade AISI 1026
21 pipe and tube, seamless, of grade AISI 1045
22 pipe and tube, of grade AISI 1526M
23 pipe and tube, seamless, of grade 4140, of circular cross-section
24 pipe and tube, seamless, of grade 4142, of circular cross-section
25 pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches  inclusive
26 pipe and tube, welded, of circular cross-section, of grade AISI 1526
27 pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500
28 Repealed
29 Repealed
30 Repealed
31 Repealed
32 flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches
33 hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches
34 Hot-rolled abrasion resistant plate, of grade 200, of a thickness from 0.3125 inch to 0.313 inch inclusive, of a width of 120 inches, of a length of 240 inches or 288 inches
35 hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches
36 flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm,  of a thickness of 1.2 mm
37 flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches
38 flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches
39 flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches
40 flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches
41 high carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches
42 flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive
43 Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive
44 Round bar, of grade C1045, of a diameter from 0.375 inches to 10 inches inclusive, turned ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi
45 Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.375 inch to 10 inches inclusive
46 bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive
47 Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from 1 inch to 4.062 inches inclusive
48 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 2.5 inches or  3.25 inches
49 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 2.875 inches
50 Angle, of iron or non-alloy steel, L section, not further worked than hot-rolled, hot-drawn or extruded, of grade A588-B, of a height of less than 3.15 inches, of leg dimensions of 3 inches by 2.5 inches, of a thickness of 0.375 inch, of a length of 20 feet
51 Aluminum bars, rods and profiles, of aluminum alloy AA2024 or AA2196
52 Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.071 inch to 0.079 inch inclusive, of a width of up to 20 inches, of a length of up to 120 inches
53 Cold drawn round bar of alloy steel, of grade AISI 4140, of specification ASTM A193, ASTM A320 or MS-101, of a diameter from 0.446 inch to 2.914 inches inclusive
54 Bar of plain carbon steel, hot-rolled, in irregularly wound coils or not, of specification G30.18 400R, of an outside diameter from 10 mm to 35 mm inclusive, of a yield strength of 400 MPa, of a tensile strength of 540 MPa
55 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE 1035 modified, of a thickness from 0.098 inch to 0.118 inch, of a width from 40 inches to 51.5 inches inclusive
56 Flat-rolled product, hot-rolled, of specification JSH270E, of a thickness of 0.0985 inch
57 Flat-rolled product, cold-rolled, of specficiation GMW3032M-ST-S CR210B2, of a thickness of 0.0614 inch
58 Flat-rolled product, cold-rolled, of specification GMW2M CR5, of a minimum thickness of 0.055 inch or 0.06 inch
59 Flat-rolled product, cold-rolled, of specification J403 10B21, of a minimum thickness of 0.079 inch or 0.115 inch or of a nominal thickness of 0.12 inch
60 Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.035 inch
61 Flat-rolled product,  galvanized, of specification J2340 490XF, of a minimum thickness of 0.0448 inch or 0.074 inch or of a nominal thickness of 0.079 inch, 0.09 inch or 0.094 inch
62 Flat-rolled product,  galvannealed, of specification A653 HSLAS Grade 70, of a minimum thickness of 0.045 inch
Schedule 3 of the Remission Order
Item Business Number Description of Goods Period Conditions
1 100317619 Flat-rolled product of non-alloy steel, hot-rolled From from July 1, 2018 to August 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
10819401244311
10819401253950
10819401253949
10819401260891
10819401174636
10819401300047
10819401300684
10819401300515
10819401300504
10819401300526
10819401319969
10819401325570
10819401325455
10819401298599
2 861611671 Flat-rolled product of non-alloy steel, hot-rolled From July 1, 2018 to August  31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
10819401263440
10819401266283
10819401233513
10819401234558
10819401264806
10819401265578
10819401261073
10819401261062
10819401299727
3 869553560 Bars and rods, hot-rolled, in irregularly wound coils, of iron, non-alloy or other alloy steel, of grade 1006, 1008, 1012, 1015, 1018, 1030, 1042, 1053, 1055, 1057, 1063, 1067, 1070, 1072 or 1077, of a diameter from 5.5 mm to 16 mm inclusive For goods imported on or after July 1, 2018 For use in manufacturing of steel wire
4 105120190 Flat-rolled product of iron or non-alloy steel, not in coils, not further worked than hot-rolled, of a width of 120 inches, of a length of 370 inches, of a thickness of 10, 11, 14 or 17 mm, of grade CSA G40.21 260 WT From July 1 to August 31, 2018 inclusive Goods ordered under Purchase Order Number 025578 dated May 17, 2018
5 864474002 Flat-rolled product of iron or non-alloy steel, steel shim stock, of a thickness of 0.008 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
6 864474002 Flat-rolled product, not in coils, hot-rolled, of specification  MIL-STD-12560, MIL-STD-12560 Class 1, MIL-STD-46100, CMS18 or CMS 19 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
7 864474002 Flat-rolled product, of specification QT 100 (GD)LS (ASTM A514), of a thickness from 1.25 inches to 4.5 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
8 864474002 Tube, hot-rolled, of specification ASTM A519, of Grade 1026 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
9 864474002 Aluminum angle of grade 6061T6 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
10 819484965 Aluminum bar of alloy 6082 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
11 819484965 Bars and rods, hot-rolled, in irregularly wound coils, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
12 819484965 Bars and rods, not further worked than cold-formed or cold-finished, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
13 896301165 Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled or cold-rolled, of grade 080XLF, 10B21, 1018, 1018 AK, 1018 SK, 1020, 1020 AK, 1050, 1055/1065, 4130, 4140, 8620, 340 XF, 420 XF, 550 XF or SPFH 590 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
14 874527823 Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than cold-rolled, of grade 1018 AK, 1018 SK, 1020 AK, 1050, 420 XF, 550 XF, 4130 or 8620 From July 1, 2018 to November 14, 2018 inclusive For use in the manufacture of original equipment parts or other parts
15 870249414 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade 080 XLF, 420 XF or 550 XF From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
16 710327693 Flat-rolled product of iron, non-alloy or other alloy steel, not in coils, not further worked than hot-rolled From July 1, 2018 to August 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
12997083757544
12997083763018
12997732964952
12997231529029
12997083816818
17 894699818 Square bar, round bar or angle, of grade A588 From July 1, 2018 to August 31, 2018 inclusive For imports recorded under the following transaction number (B3-3 Form):
17863105499904
18 894699818 Tube of square or rectangular cross-section, welded From July 1, 2018 to August 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
17863105478362
17863105491882
19 894699818 Tube of circular cross-section From July 1, 2018 to August 31, 2018 inclusive For imports recorded under the following transaction number (B3-3 Form):
17863105502271
20 100763440 Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS6000, SCGA CR GA 270, MS.50002, SPH HR 590, GMW CR 340, GMW CR CR3¸ GMW CR 420, GMW HR HR1 or GMW CR 340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
21 100763440 Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, M2020, M2027, SCGA GN DQ SK, SCGA GN EDDQ AK, GMW CR 420, GMW HR HR1 or GMW CR 340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
22 100763440 Aluminum plates, sheets and strip, of alloy AA3004 or AA5000 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
23 100874247 Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS 67, MS264, MS6000 or MS.50002 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
24 100874247 Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002 or GMW CR From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
25 100874247 Aluminum plates, sheets and strip, of alloy AA3004 or AA6000 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
26 899313571 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification SPH HR 370, SPH HR 440 or MS 67 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
27 899313571 Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000 or GMW CR From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
28 107304340 Flat-rolled product of iron, non-alloy, other alloy or stainless steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS264, GMW HR 340, SPC CR DQ SK, M1142, M2020, MS.50002, MS6000, SCGA GN DQ AK, SP GN DQ, GMW CR 270, GMW HR HR1 or M2020 CR From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
29 107304340 Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, GMW CR, GMW HR, MS66, MS67, MS264 or SCGA GN From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
30 107304340 Aluminum plates, sheets and strip, of alloy AA3004, AA5000, AA6016, AA6061 or A93003 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
31 100086768 Flat-rolled product of iron or non-alloy steel, cut to length or configured blank, flat polished and/or treated with zinc phosphate and lube For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
32 123307597RM0020 Flat-rolled product, not further worked than hot-rolled, of specification MS66 or MS.50002 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
33 123307597RM0020 Flat-rolled product, clad, plated or coated, of specification GA6M55V 590 DT, GA6M66 HR 11, 6M66V 050XK, MS.50002, MS264 or GMW3032M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
34 123307597RM0020 Aluminum plates, sheets and strip, of specification MS-5007 5052-H32 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
35 123307597RM0013 Flat-rolled product, not further worked than hot-rolled, of specification MS50002, 6M55V035SK or 6M55HR12 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
36 123307597RM0013 Flat-rolled product, galvanized, of specification MS.50002, MS-6000 or WSD-1A333-A2 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
37 123307597RM0013 Flat-rolled product, not further worked than cold-rolled, of specification MS50002 or M1A333-A2 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
38 123307597RM0013 Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
39 123307597RM0013 Aluminum plates, sheets and strip, of specification 5052-H32-GMW15935M-AL-S-5000A-O or 5052-H32 GMW15192M-AL-S-5000-ST-90-U From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
40 123307597RM0013 Aluminum castings of alloy A356-T6 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
41 123307597RM0033 Flat-rolled product, hot-rolled, galvanized, of specification 6M55V-060, 50002, MS-6000, hot-rolled 060XK or LAX420Y480T From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
42 123307597RM0033 Flat-rolled product, not further worked than cold-rolled, of specification MS-264-60XK or MS-264-35XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
43 123307597RM0033 Tube, of iron or non-alloy steel, welded, of circular cross-section, of specification 22MnB5 M From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
44 123307597RM0033 Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
45 123307597RM0023 Flat-rolled product of non-alloy or other alloy steel, galvanized, of a width of 26.38, 28.74, 37.205 or 32.125 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
46 123307597RM0023 Flat-rolled product, not further worked than hot-rolled, of a width of 10.18, 10.275 or 23.307 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
47 123307597RM0023 Flat-rolled product, not further worked than cold-rolled, of a width of 11.875 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
48 123307597RM0023 Flat-rolled product, galvanized, of a width of 9.5, 17.559 or 20.866 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
49 123307597RM0029 Flat-rolled product, not further worked than cold-rolled, of a boron and manganese alloy From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
50 123307597RM0029 Flat-rolled product, high strength low alloy steel, hot-rolled or cold-rolled, galvanized From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
51 123307597RM0029 Flat-rolled product, low carbon mild steel coil, with hot dipped galvanneal zinc coating From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
52 123307597RM0019 Flat-rolled product of other alloy steel, not further than cold-rolled, of a thickness of 0.89 mm, 1.33 mm or 1.65 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
53 123307597RM0019 Flat-rolled product of other alloy steel, electrolytically or otherwise plated or coated with zinc, of a thickness from 0.66 mm to 2.86 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
54 123307597RM0019 Flat-rolled of other alloy steel, not further worked than hot-rolled, of a thickness of 2.514 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
55 123307597RM0019 Aluminum plates, sheets and strip, of aluminum alloys, not clad, of a thickness from 0.97 mm to 1.94 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
56 123307597RM0022 Flat-rolled product, low carbon steel, cold-rolled, of specification MS-67 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
57 123307597RM0022 Flat-rolled product, cold-rolled, dual-phase or martensitic steel, electrogalvanized, of specification GMW3399M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
58 123307597RM0022 Flat-rolled product, cold-rolled, dual phase or mild steel, galvanized, of specification MS.50002 or GMW3399M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
59 123307597RM0022 Flat-rolled product, not further worked than cold-rolled, multi-phase or mild steel, of specification GMW3399M-ST-S or MS-67 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
60 123307597RM0022 Flat-rolled product, cold-rolled or hot-rolled, dual-phase, multi-phase or mild steel, electrogalvanized or galvanized, of specification MS.50002, GMW3399M-ST-S or GMW3032M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
61 123307597RM0022 Aluminum plates, sheets or strip, of alloy 6111-T4, of specification WSB-M2A152-A1 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
62 123307597RM0030 Flat-rolled product, not further worked than cold-rolled, of grade bake hardenednable, of a nominal thickness of 0.0394 or 0.0472 inches From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
63 123307597RM0030 Flat-rolled product, cold-rolled, of low carbon, high strength low alloy or dual phase steel, hot dipped with galvanneal zinc coating, of a nominal thickness from 0.0276 inches to 0.1575 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
64 896543659RM0006 Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 1020, of a thickness of 2.4384 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
65 896543659RM0014 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J403 1010 or SAE J403 1022 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
66 849292990 Bars and rods, hot-rolled,  in irregularly wound coils, of grade 9254, SUP12MT or HDS12, of a diameter from 11.9 mm to 17.9 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
67 849292990 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160, of a diameter from 19 mm to 40 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
68 849292990 Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 to 6 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
69 846263531 Semi-finished tubes of iron or steel, of an outside diameter of 4.5 inches to 7 inches inclusive or of an outside diameter of 9.625 inches, of a kind used in production of finished casing and tubing for oil or gas For goods imported on or after July 1, 2018 Goods supplied by affiliated company
70 104546718 Flat-rolled product, in coils, galvanized, of specification ASTM A653 Grade 55 For goods imported on October 1, 2018 or after Goods ordered under purchase number:
  • 27126 (March 28, 2018) – to be imported; or 
  • 27273 (May 1, 2018) – imported under transaction number (B3-3 Form) 13177192286910
71 104546718 Flat-rolled product, in coils, galvanized, of specification 50002-DPC420Y780T For goods imported on or after November 1, 2018 Goods ordered under purchase order number:
  • 26975 (February 15, 2018) – to be imported;
  • 26976 (February 15, 2018) – to be imported; or
  • 27278 (May 1, 2018) – to be imported
72 104546718 Flat-rolled product, in coils, galvanized, of designation Extra Deep Drawing Steel (EDDS) For goods imported on November 1, 2018 or after Goods ordered under purchase order number:
  • 27195 (April 13, 2018) -  imported under transaction number (B3-3 Form) 13177193160546 and to be imported;
  • 27275 (May 1, 2018) – to be imported; or
  • 27276 (May 1, 2018) – to be imported
73 104546718 Flat-rolled product, in coils, galvanized, of specification 50002-LAC340Y410T For goods imported on September 1, 2018 or after Goods ordered under purchase order number:
  •  27274 (May 1, 2018)  - to be imported;
  • 27277 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177193042586 and to be imported; 
  • 27347 (May 23, 2018) - imported under transaction number (B3-3 Form) 13177192417019 and to be imported; or
  • 27350 (May 23, 2018) - imported under transaction number (B3-3 Form) 13177193267292, 13177191284006 and to be imported
74 104546718 Flat-rolled product, in coils, galvanized, of designation Deep Drawing Steel (DDS) For goods imported on October 4, 2018 Goods ordered under purchase order number 27279 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177192100313
75 104546718 Flat-rolled product, in coils, galvanized, of designation Commercial Steel (CS) Type B 1006 For goods imported on or after December 1, 2018 Goods ordered under purchase order number 27167 (April 10, 2018) – to be imported
76 104546718 Flat-rolled product, in coils, galvanized, of specification GMW3032M-ST-S 500LA From August 1, 2018 to September 30, 2018 inclusive Goods ordered under Purchase Order Number 27334 (May 16, 2018) - imported under any of the following transaction numbers (B3-3 Form):
13177190728943
13177191379943
13177191930996
13177191944060
77 104546718 Flat-rolled product, in coils, galvanized, of specification SAE J2340 550XF From  August 1, 2018 to September 30, 2018 inclusive Goods ordered under Purchase Order Number 27359 (May 24, 2018) – imported under the following transaction number (B3-3 Form):
13177315258407
13177191780096
78 105492664 Flat-rolled product, galvanized or galvannealed, of specification GMW3032M-ST-S, GMW3399W-ST-S, MS-50002, MS-6000 or HR660Y760T-CP From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
79 105492664 Flat-rolled product, not further worked than cold-rolled, of specification WSS-M1A365-A11, WSS-M1A365-A13, WSS-M1A367-A36, WSD-M1A333-A2 or GMW3032M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
80 105492664 Flat-rolled product, not further worked than hot-rolled, of specification WSS-M1A354-A20, WSD-M1A333-A1, WSS-M1A365-A20, WSS-M1A365-A22, WSS-M1A365-A23, WSS-M1A367-A46, JSH270E, MS-6000, HR PO CQ 66, HR PO DQ 66, HR PO DQ AK 66, HR660Y760T-CP, SAEJ403, MS66, HR660Y760T-CP, MS.50002 or 6M44VA From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
81 105492664 Aluminum plates, sheets and strip, of alloy 6022-T4 or 1100 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
82 105492664 Aluminum extrusion From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
83 105492664 Tube, welded, of circular cross-section, of an outside diameter from 0.787 inch to 3.125 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
84 132644584 Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
85 132644584 Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR780T/420Y-DP-HD60G60G-U, of a width of 241.30 mm or 472.44 mm, of a thickness of 1.2mm (+/- 0.6 mm) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
86 132644584 Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2mm (+/- 0.6 mm ) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
87 132644584 Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR980T/700Y-MP-LCE EG60G60G-U, of a width of 1187.45 mm, of a thickness of 1.2mm (+/- 0.6 mm) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
88 132644584 Flat-rolled product, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 228.60 mm or 647.70 mm, of a thickness of 2.10 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
89 104708409 or 809569957 Flat-rolled product of iron or non-alloy steel, not in coils, not further than hot-rolled, of classification DNV-GL Grade A, DNV-GL Grade A36, DNV-GL Grade D or DNV-GL Grade D36 From July 1, 2018 to June 30, 2019 inclusive  
90 104708409 Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SAE J2340 CR550XF From July 1, 2018 to December 31, 2018 inclusive For use in the manufacture of original equipment parts or other parts
91 104708409 Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SPC 980 DU-T From July 1, 2018 to December 31, 2018 inclusive For use in the manufacture of original equipment parts or other parts
92 104708409 Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade 4130 annealed From July 1, 2018 to December 31, 2018 inclusive For use in the manufacture of original equipment parts or other parts
93 861435121 Flat-rolled product, not further worked than hot-rolled, of specification MS-264-S-060XF, of a nominal thickness of 3 mm to 4 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
94 861435121 Flat-rolled product, not further worked than cold-rolled, of specification MS-67-S-DDQ CR06 Grade, of a nominal thickness of 0.76 or 0.8 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
95 861435121 Flat-rolled product, not further than hot-rolled, of specification GMW 3032M-ST-S-HR420 LA, of a nominal thickness of 2.5 mm or 3.5 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
96 861435121 Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR340 LA From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
97 861435121 Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR420 LA, of a nominal thickness from 0.5 mm to 0.8 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
98 861435121 Flat-rolled product, not further worked than cold-rolled, of specification SAE J2340 340 XF, of a nominal thickness of 0.8 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
99 861435121 Flat-rolled product, not further worked than cold-rolled, of specification ASTMA 1008A DDS From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
100 897264149 Flat-rolled product, of non-alloy steel, not further worked than hot-rolled, pickled and oiled, of specification MS-264-035-SK or MS-66-CQ From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
101 897264149 Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-080-XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
102 897264149 Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-99V-040SK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
103 867876195 Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-050-XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
104 867876195 Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55V-080XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
105 867876195 Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-55V-590DT, MS-6000-44A-DQ or MS-6000-55V-780TT From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
106 897419461 Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55E-CR02 or MS-6000-99V-050XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
107 897419461 Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-44VA-080XK, MS-6000-55PE-CR02, MS-6000-44A-DDQ, MS-6000-44A-DQ, MS-6000-55E-CR02, MS-6000-55V-690TT or MS-6000-55V-590DT From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
108 865927362 Aluminum profiles, of aluminum alloy From July 1, 2018 to November 30, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
16865819296413
16865819296015
16865819296037
16865819305880
16865819316941
16865819323699
16865819325533
16865819326578
16865819340224
16865819357781
16865819363142
16865819367339
16865819367545
16865819383317
16865819387059
16865819388061
16865819400078
16865819407634
16865819414940
16865819415111
16865819422611
16865819425055
16865819447186
16865819455791
16865819469456
109 121306914 or 718999485 Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of specification 50002-CR02, 50002-CR04, 50002-DPC330Y590T, 50002-DPC340Y590T, 50002-HR13, 50002-LAC340Y410T, 11250 LAC 340Y410T, 5000-LAC550Y620T, 50002-LAH340Y410T, 50002-LAH550Y620T, 50002-TRC400Y690T or DDS 60G60G GA 6M55 CR04 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
110 121306914 or 718999485 Flat-rolled product of iron or non-alloy steel, plated or coated with zinc, of specification 50002-CR02, 50002-CR04, 50002-DPC420Y780T, 50002-LAC550Y620T or 5002-TRC400Y690T From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
111 121306914 or 718999485 Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of specification 50002-LAC340Y410T From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
112 121306914 or 718999485 Flat-rolled product of iron or non-alloy steel, clad, plated or coated, of specification 50002-LAC340Y410T, 50002-LAH340Y410T or 50002-LAH550Y620T From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
113 121306914 or 718999485 Tube or pipe, welded, of circular cross-section, of other alloy steel, of specification 50002-DPC420Y780T From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
114 121306914 or 718999485 Flat-rolled product of other alloy steel, not further worked than cold-rolled, of specification M2032 RP153-980 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
115 121306914 or 718999485 Flat-rolled product of other alloy steel, of specification GN DQ AK or MS 6000 D 44A CHG AF From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
116 100355437 Tube, pipe or hollow profile, of stainless steel, of circular cross-section, welded or seamless, of grade 304L, of specification SAE J405/ASTM A240 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
117 100355437 Tube, pipe or hollow profile, of iron or non-alloy steel, welded, of circular cross-section, of grade 1008 or 1010, of specification TSG3150G/ASTM A513, SAE J403, SAE J525 or SAE J526 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
118 101238244 Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7150, 7175 or 7474) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
119 101238244 Flat-rolled product, of grade Inconel 625 or Inconel 718 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
120 101238244 Bar and rod, of grade Inconel 625 or Inconel 718 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
121 100618719 Aluminum windows For goods imported on October 27, 2018 For imports recorded under the following transaction number (B3-3 Form):
13284639341882
122 897270096 Aluminum doors or windows From July 1, 2018 to July 31, 2018 For imports recorded under the following transaction number (B3-3 Form):
12997492696978
123 105347918 Bar and rod, not further worked than cold formed or cold finished, of other alloy steel, of 5150M grade steel From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
124 105347918 Bar and rod, of iron or non-alloy steel, of SAEJ403 1050 grade steel From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
125 866465701 Aluminum expansion joint covers From August 3, 2018 to October 6, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
10215811360847
10215811545543
10215811682367
126 866465701 Aluminum expansion joint covers (models SBP-4-8-SP, HDNBL-2-4G, 6GW-4-8G, SBPL-4-8-SP, NBAF-6G, HDNB-2-4, CMX-4-8, CMX-2-4, CMX-6, CMXL-2-6, CMXL-3-6 or CMXL-4-8) or fire barrier insulation fiber (models 2HFFB-12, 2HFFB-9, 2HWFB-12 or 2HWFB-9) From July 1, 2018 to March 31, 2019 inclusive Goods purchased to fulfill subcontract 40467-2797-C dated December 1, 2017
127 865908990 Bar and rod, round, of grade 1215, of specification ASTM A29 or ASTM A108 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
128 865908990 Bar and rod, round, of grade 1144 stress proof, of specification ASTM A29, ASTM A108 or ASTM A311 Class B From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
129 100174457 Aluminum, doors or windows, and their frames From July 8, 2018 to September 2, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
10215811289439
10215811310631
10215811381604
10215811439123
10215811461086
10215811495849
130 105507719 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, of a thickness of less than 3 mm, hot dipped, Grade X From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
131 868987363 or
105507719
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, electrolytically plated or coated with zinc, of grade 40‑60 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
132 868987363 or
105507719
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated with zinc, of a thickness exceeding 1 mm, galvanized, of grade 40-60 Series: 316/317/327/330/341/342/344/625/627/629-CR From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
133 105507719 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, of part codes 262587P-01-03 .315 X 15.35, MS‑264<S>035SK CHG or MS‑6000<D>44VA‑080XK From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
134 105507719 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled (cold-reduced), of grade 60 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
135 868987363 or
105507719
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, galvanized, of grade 50-60 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
136 105507719 Flat-rolled products of other alloy steel, of a width of 600 mm or more, galvanized, of grade 60 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
137 868987363 or
105507719
Flat-rolled products of other alloy steel, galvanized, of grade 60 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
138 105507719 Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade 50 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
139 105179758 Bar and rod, Gray Iron and Ductile Iron Continuous Cast Dura-Bar, of grade 65-45-12, 80-55-06, 100-760-02 or 201-NI-RESIS From July 1, 2018 to June 30, 2019 inclusive
140 122615503 Single Walled Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
141 122615503 Plain Annealed Single Walled Steel Tubing, meeting GM124M/GMW17334 requirements From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
142 122615503 Single Walled Cut to Length Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
143 806775540 Pipe, polymer lined carbon steel, of polymer liner PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy) From July 1, 2018 to February 28, 2019 inclusive  
144 101400760 Bar and rod, alloy solid steel bar, cold-rolled, of AMS or BMS specification From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
145 101400760 Bar and rod, of stainless steel, hot-rolled, of AMS or BMS specification From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
146 101400760 Bar and rod, of stainless steel, 321 Stainless Steel, of a diameter greater than 25mm, of AMS or BMS specification From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
147 101400760 Aluminum alloy plate or billet, of AMS or BMS specification, of a thickness  greater than 7mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
148 101400760 Manifold Body Castings, of C355-T6 Aluminum From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
149 101400760 Aluminum bar and rod, of specification AMS or BMS, of a diameter greater than 12.7 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
150 101400760 Aluminum tubing, of alloy 7075 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
151 866460074 Flat-rolled product, hot-rolled or cold-rolled, spheroidized and annealed, of grades J403 1045, J403 1050, J404 4140, J404 4130 or A506 4130 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
152 895418499 Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated, of a thickness of 4.75mm or more, of specification SPH440-OD or SPH590-OD From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
153 895418499 Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, cold-rolled, not clad, plated or coated, of a thickness exceeding 0.5mm but less than 3mm, of specification SPC270C, SPC270DU, SPC440, SPC590 or SPC590DU From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
154 131874299 Structures and parts of structures, of aluminum, of model number 750-BL, 750-BR, 550-BL, 550-BR, OR-20, BIB14-MI, BIB14-ML or BIB14-BR From July 1, 2018 to June 30, 2019 inclusive  
155 894141241RM0003 Flat-rolled product, of stainless steel, of a width of less than 600mm, not further worked than rolled, of part number 2144M5247-2 or 2144M5261-2 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
156 894141241RM0003 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of part number 22521-1, 22587-1, 161A2126-4, 51406-1 or CEVM 300M From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
157 894141241RM0003 Aluminum castings, angles, shims, forge or sheets to be cut into shims, of part number 22573-1, 25207-1, 515Z3008-501W100R or 1003F6202C002 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
158 894141241RM0003 Bar, flat or rectangle, not further worked than forged, of part number 161A1210-1 or 161A1210-2 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
159 894141241RM0003 or
894141241RM0004
Bar and rod, not further worked than cold-formed or cold-finished, of grade 4130 or 4340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
160 894141241RM0003 Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of aluminum alloy, of part number 4557100025-004, 491Z1661-1, 495Z5511-7-MOD3, GD437-1051-7, 85216815-001, GD417-1606-3, GM147-0156-3/-4, 511Z3134-1, 1003M6322L001, 55-2355018-00, 1003M4003C001, 55-5059007-00, GC413-1238-1, 511Z3125-1, 82710621-103, 2143A6218-2, 32326-1, 2144M5286-1, 511Z3087-501, CC670-12213-3, QQA-250/12, 85714635-103, 83910542-101, S-AL-7050, 85713505-103, S-AL-7075-T7351, 1002720041-001 or 1005210117-001 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
161 894141241RM0003 Aluminum bar (Rectangular, Round or Square) or extrusions, of part number 85711616‑102 or 85712210-101/-102 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
162 894141241RM0001 or
894141241RM0004
Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 17-4 PH, 347, 304L, 303Se, 347 or 303 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
163 894141241RM0001 Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of grade 4130, 1095, MIL-S-22499 or CO‑NETIC From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
164 894141241RM0001 Flat-rolled product, of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade  CO‑NETIC AA, CRES or AMIL-S-22499 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
165 894141241RM0001 Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 625, 4130 or 4140 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
166 894141241RM0001 Tube, of stainless steel, round, seamless, hot drawn, of grade 304 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
167 894141241RM0001 Tube, round, seamless, hot drawn, of Grade 4130 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
168 894141241RM0001 or
894141241RM0004
Aluminum bar (rectangular, round or square) or extrusions, of grade 2024, 2219, 6061, 7075, 6063, 15-5 PH, 7075, 7150, 7055, 7136 or 2224 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
169 894141241RM0001 Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 6061, 7075, 7475, 5052, 6013, 6061, 7140, 7175,  S3-6 or 1100 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
170 894141241RM0001 Formed aluminum can – tube with bottom, but no top, of grade 3003 or 1100 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
171 894141241RM0001 Aluminum castings, angles, shims or sheets to be cut into shims, of grade 6063, 2024, 356, 17-4PH, 3003, A356 or 15‑5PH From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
172 894141241RM0001 Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 347, 304L, 303Se, 347 or 303 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
173 894141241RM0004 Bar and rod, of part number R-ST-4330-4.000 DIA (alloy 4330), S-ST-4340-1.250 (alloy 4340) or
S-ST-4340-1.250 X 2.000 (alloy 4340)
From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
174 894141241RM0004 Flat-rolled product, hot-rolled or cold-rolled, of grade 4130 or 4340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
175 894141241RM0004 Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, of grade 4340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
176 894141241RM0004 Bar and rod, of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4330, 4330M or 4340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
177 894141241RM0004 Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Part Number: S-AL-7050-T7452-3.500, S-AL-7050-T7452-600) (alloy 7050) or S-AL-7050 (alloy 7050) (-T7452)-5.500X5.500 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
178 894141241RM0004 Aluminum castings, angles, shims, forge or sheet to be cut into shims, of grade 356, 7075 or 7175 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
179 894141241RM0004 Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 7050 or 7075 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
180 100869130 Semi-finished product, of stainless steel, of rectangular (other than square) cross-section, of grade 13-8 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
181 100869130 Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grades 13-8, 15-5 or 465 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
182 100869130 Bar and rod, flat or rectangle, not further worked than forged, of grade 4330M From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
183 100869130 Aluminum bar (rectangular, round or square) or extrusions, of grade 7075 or 7150 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
184 100869130 Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 2024, 2124, 2219, 2324, 6061, 7050, 7075, 7140, 7175 or 7475 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
185 100869130 Aluminum castings, angles, shims, forge, or sheets to be cut into shims, of grade 7050, 7075 or 356 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
186 804861284 Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 7175, 7475, 7050, 7075, 7010, 2024, 2124, 7040, 7140 or 7055 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
187 895418499 Flat-rolled product, of iron or non-alloy steel, not clad, plated or coated, of grade SPC270A, SPC270C, SPC270DU, SPC440, SPC590, SPC590DU, SPH440-OD or SPH590‑OD From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
188 895418499 Flat-rolled product, of iron or non-alloy steel, clad, plated or coated, of grade SCGA270C-45, SCGA440-45, SCGA340HR-4 or SCGA340HR-45 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
189 895418499 Flat-rolled product, of iron, non-alloy or other alloy steel, in coils, of grade SPH270C-OD, SPH270C-OF, SPH590FC‑OF, SPH590SF-OD, SPC980DU, SPC980DUB or SPC1180DUB From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
190 895418499 Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of grade SCGA1180DUB-45, SCGA270D-45, SCGA270DU-45, SCGA590DU-45, SCGA980DUB-45 or SCGA1180DUB-45 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
191 105468391 Stainless steel wire, of a diameter of 0.188 inch, of grade 17-7 PH, of specification AMS 5678 CLASS C From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
192 105468391 Stainless steel plate, of a thickness of 2.5 inches thick, of grade 15-5 PH, of specification AMS 5862 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
193 105468391 Stainless steel rectangular bar, of specification AMS 5629 or 5643 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
194 105468391 Wire of stainless steel, part number MS20995C32 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
195 105468391 Stainless steel bar, of a diameter of 3.5 inches, of grade 4330, of specification AMS 6427 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
196 105468391 Aluminum bars, rods and profiles, of aluminum alloys, of specification AMS-QQ-A-200/3, AMS‑QQ‑A‑200/3.19, AMS-QQ-A-200/11, AMS-QQ-A-200/15 or AMS-QQ-A-250/12 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
197 105468391 Aluminum plates, sheets and strip, of aluminum alloys, of specification AMS 4050, AMS 4078, AMS 5862, AMS-QQ-A-250/4, AMS-QQ-A-250/5, AMS‑QQ‑A-250/12, BAMS 516-002, AMS 516-003 or BAMS 7-323 TYPE 1 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
198 105468391 Other articles of aluminum, of the following descriptions and part numbers: nuts (BACC30M6, NAS1195DD3XH or NAS463XDD10), rivets (B0205017AD3-3.5S, BACR15BA3AD4C, BACR15BA4D4C, MS20426AD4-5, MS20470AD4-5A or NAS9302BNS-4-02), washers (BACS53B1EA2, NAS1149C0416R, NAS1149D0416H, NAS1149D0432K or NAS1149D1016K) or stand-offs (B0204040AL-18W) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
199 883281107 Flat-rolled product, cold-rolled annealed, in coils, with percentage of chromium, molybdenum or manganese lower than standard for Grade 4140 or 4142 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
200 103333662 Bar and rod, cold-rolled, turned and polished, of 1045 grade steel, part number H200501400 or H200503600 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
201 100234301 Bars and rods of other alloy steel, of grade 4140, 4145, 4330V, EN30B, PremoMax or 8620, of a diameter from 0.5 inch to 20 inches inclusive For goods imported on or after July 1, 2018  
202 100234301 Bars and rods, of stainless steel, of grade high strength austenitic non-magnetic stainless steel 1515HS, 1515C, Datalloy, DNM-140 or Nitronic, of a diameter from 1 inch to 15 inches inclusive For goods imported on or after July 1, 2018  
203 100234301 Bars and rods, of stainless steel, of grade 317, 347 or SCF19, of a diameter from  0.75 inch to 3 inches inclusive For goods imported on or after July 1, 2018  
204 801135500 Flat-rolled pressure vessel quality plate, not further worked than hot-rolled, of grade ASME SA-285-C For goods imported on or after July 1, 2018 Imported for sale to company with business number
100569987
205 891784126 Concrete reinforcing bar, of grade 60, of specification ASTM A615/A615M, of a length of 300 mm to 850 mm inclusive, of a diameter from 15 mm to 30 mm inclusive For goods imported on or after July 1, 2018  
206 891784126 Concrete reinforcing bar, of grade 60, of specification A615/A615M, bent into an L shape with one length of 130 mm to 240 mm inclusive and the other length of 250 mm, of a diameter from 15 mm to 30 mm inclusive For goods imported on or after July 1, 2018  
207 103872651 Cold drawn bar, of grade 8620, with a diameter of up to 1.0625 inches, of minimum yield strength of 75,000 psi, of a hardness of 90 HRB to 26 HRC For goods imported on or after July 1, 2018  
208 104402078 or
809569957
Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness of more than 1.5 inches, of a width of more than 116 inches, of a length of more than 580 inches For goods imported on or after July 1, 2018 Goods purchased under quote notice 18-0027 dated March 1, 2018 for project number 37195-0001
209 846855336;
144455847;
871196416;
782632293; or
809935364
Flat-rolled product, not further worked than hot-rolled, of grade SA-517-B, quenched and tempered, of a thickness from 0.25 inches to 0.45 inches inclusive, of a width from 90 inches to 120 inches inclusive, of a length from 273 inches to 445 inches inclusive For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
210 846855336;
144455847;
871196416;
782632293; or
809935364
Flat-rolled product, not further worked than hot-rolled, of grade SA-517-E, quenched and tempered, of a thickness from 0.25 inches to 1.750 inches inclusive, of a width from 96 inches to 120 inches inclusive, of a length from 280 inches to 454 inches inclusive For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
211 846855336;
144455847;
871196416;
782632293; or
809935364
Flat-rolled product, not further worked than hot-rolled, of grade SA-612 or SA-612N, quenched and tempered, of a thickness from 0.492 inches to 0.721 inches inclusive, of a width from 101 inches to 121 inches inclusive, of a length from 253 inches to 417 inches inclusive  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
212 807325279 or
105497242
Round, Keystone and House shaped stainless steel wire, of grade 304L or 316L, annealed and cold rolled, of a width from 0.045 inches  to 0.190 inches or of a diameter from 0.052 inches to 0.250 inches inclusive, of a height from 0.060 to 0.380 inches inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 105497242
213 102521416 Stainless steel ingots of alloy 17-4, 304, 347 or GX-4 From July 1, 2018 to June 30, 2019 inclusive  
214 895418499 Flat-rolled product of iron, non-alloy or other alloy steel, of specification SPC 440, SPH440, SPH590, SCGA270C, SCGA270D, SCGA270DV, SCGA340, SCGA440, SCGA590, SCGA980, SCGA 1100, SPC270C, SPC270D or SPC980 From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 105336598
215 104994397 Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of specification HR550LA-70G&70G-G1, ASTM A463M, GM6178M, WSD-M1A295-A3 or SCGA270D-45 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
216 104994397 Aluminum plates, sheets and strip, of alloy AA5052-O/15935-AL-S-5000A, AA5052-H32 or SAE-J2340-340X From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
217 101603405 Flat-rolled product, of iron or non-alloy steel, of specification SPH590-OD, GMW3032M-ST-S-HR550LA, 50002-340Y470T, MS264, SPH270C-OD, SPH440-OD, SPH590-OD, WSS-M1A365-A20 or WSS-M1A367-A46 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
218 101603405 Flat-rolled product of iron or non alloy steel, clad, plated or coated, of specification SHGA270C-45, 50001- PHS950Y1300T, 50002-LAC340Y410T, 50002-LAC380Y450T, MS6000-44VA-355K, 50002-CR02-ELECTROGLAV GI 60/60 U, 50002-LAC550Y620T, 50002-LAH550Y620T or 50000- CR02-HDGALVANIZED GI 60/60 U From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
219 101603405 Flat-rolled product of other alloy steel, of specification MS264, MS67, 50001-PHS950Y1300T, GMW3399M-STY-S-CR980T/700MP, WSS-M1A357-A1, GMW14400M-ST-S-HS1300T/950Y, 50002-LAC340Y410T, SPH270C-OD or SPH590-OD From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
220 710327693 Flat-rolled product of grade 350 AT, of specification CSA G40.21 From July 1 2018 to August 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
12997775643180
12997775643077
12997775794980
221 710327693 Flat-rolled product of grade 350 AT or 350 WT, of specification CSA G40.21 From July 1, 2018 to September 30, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
12997775758986
12997775776216
12997775794980
12997775794877
12997775810149
12997775820697
12997775891762
222 104402078 or 809569957 Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness from 0.5 inch to 2 inches inclusive, of a width from 95 inches to 124 inches, of a length of 554 inches to 954 inches inclusive From July 1, 2018 to December 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
13409084409760
13409084409942
13409086210857
13409086211006
13409086212860
13409086212882
13409086212893
13409086213155
13409086213326
13409086214704
13409086217397
13409086217605
223 103823704 Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAC240Y320T (cold rolled) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
224 103823704 Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAH240Y320T (hot rolled) or MS50002.LAH340Y410T (hot rolled) From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
225 119873420 Flat-rolled product of other alloy steel, cold-rolled, galvannealed, plated or coated with zinc, of specification MS6000-44VA From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
226 119873420 Flat-rolled product of other alloy steel, cold-rolled, dual phase, galvanized, of specification MS50002 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
227 105120190 Flat bar, of grade A572-50, of a thickness of 3 inches, of a width of 4 inches For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
228 105120190 Flat bar, of grade A36, of a thickness of 2 inches, of a width of 2.25 inches For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
229 105492664 Stainless steel, in coils, aluminized From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
230 104708409 Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
231 104708409 Aluminum plates, sheets and strip, of specification GMW15192M-AL-S-6000-R-110-U From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
232 104546718 Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
233 887356392 Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S or SAE J2340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
234 887356392 Flat-rolled product, galvanized, of specification GMW3032M-ST-S or SAE J2340 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
235 817808496 Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
236 100755628 Ingots, of other alloy steel For goods imported on or after July 1, 2018 inclusive For goods ordered under one of the following purchase orders:
28702H
30136H
29522D
30209H
30222H
237 100755628 Ingots, of non-alloy steel For goods imported on or after July 1, 2018 inclusive For goods ordered under one of the following purchase orders:
28691H
30181H
30184H
30186H
238 100755628 Ingots, of other alloy or stainless steel From July 1, 2018 to September 30, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
13276214951970 13276215051598 13276215179169
13276215179283
239 136523859 Aluminum Louvres From July 1, 2018 to November 30, 2018 inclusive For imports recorded under the following transaction number (B3-3 Form):
13409534033114
240 862901691 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of grade Duplex 2304 From July 1, 2018 to December 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
12138734228501
12138734220477
12138734220503
12138734222629
12138734222890
12138734223700
12138734227920
12138734228011
12138734271388
12138734744562
12138734766967
12138734767354
12138734768242
12138734779906
12138734780204
12138734791979
12138734774068
12138734785061
12138734792765
12138734959551
12138735004719
12138735004229
12138735007119
12138735010706
12138735022915
12138735022937
12138735021082
12138735027362
12138735032438
12138735069329
12138735069363
12138735068011
12138735090985
12138735091167
12138735169934
241 809569957 Flat-rolled product of grade 350 AT From July 1, 2018 to August 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
13409084406892
13409086214873
13409086213612
13049084384168
13409086212702
13409084384044
13409084384226
242 141718262 Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 From July 1, 2018 to December 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
11197004149460
11197004149507
11197004171971
11197004183715
11197004184384
11197004184395
11197004185125
11197004189276
11197004189880
11197004198051
243 141718262 Flat-rolled product, of grade A572 From July 1, 2018 to December 31, 2018 inclusive For imports recorded under the following transaction number (B3-3 Form):
11197004223018
244 863402731 Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 From July 1, 2018 to December 31, 2018 inclusive Goods imported for sale to company with business number 141718262 and ordered under purchase order number 85563, 85565 or 85566
245 101980753 Flat-rolled product of iron or non-alloy steel, hot-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S,
GMW3399M-ST-S or SAEJ2340
From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
246 101980753 Flat-rolled product of iron or non-alloy steel, cold-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S or
GMW3399M-ST-S
From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
247 101980753 Flat-rolled product of iron or non-alloy steel, galvanized or electrogalvanized, of specification GMW2M-ST-S, GMW3032M-ST-S or GMW3399M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
248 101980753 Flat-rolled product of other alloy steel, hot-rolled or cold-rolled, of specification GMW2M-ST-S,  GMW3032M-ST-S, GMW3399M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
249 101980753 Flat-rolled product of other alloy steel, galvanized,  electrogalvanized, clad, plated or coated, of specification GMW2M-ST-S,  GMW3032M-ST-S, GMW3399M-ST-S, GMW14400M-ST-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
250 101980753 Tube of iron, non-alloy or other alloy steel, welded From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
251 101980753 Aluminum sheet of specification GMW15192M-AL-S From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
252 101980753 Rivets, bolts, nuts, rings, washers, screws and similar articles of aluminum From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
253 104708409 Aluminum flat bars, round bars or extrusions, of alloy 6061-T6511 From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896860590
254 105213755 Wire of stainless steel, cold finished, of type 314, 330cb or 35/19cb, of a diameter less than 0.5 inch For goods imported on and after July 1, 2018 For use in the manufacture of original equipment parts or other parts
255 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 050 XF, 060XF, 070 XF or 080XF, of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
256 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 1006, 1008 or 1010, of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
257 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 340 XF, 400XF, 420XF, 490XF or 550 XF,  of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
258 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade MS00026,  of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
259 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade MS00025,  of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
260 105412845 Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade 40 MOD, 1055 or 4130,  of a width less than 600 mm, of a thickness of 5.5 mm or less From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
261 105412845 Wire, of iron or non-alloy steel, of a diameter of 0.079 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
262 103648721 Aluminum extrusion, of alloy 6063-T6, of a length from 4 meters to 8 meters inclusive For goods imported on and after July 1, 2018 Goods ordered under purchase order number:
35605
35756
35811
35884
263 827413949 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width of up to 250 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
264 827413949 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width up to 250 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
265 827413949 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 SAEJ1392 or 420XF-SAEJ2340, of a thickness of up to 4.5 mm inclusive, of a width of up to 275 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
266 827413949 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, of a thickness up to 2.5 mm inclusive, of a width of up to 250 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
267 827413949 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of up to 4 mm inclusive, of a width of up to 250 mm inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
268 104708409 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 827413949
269 104708409 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.157 inch to 0.181 inch inclusive, of a width of 5.325 inches From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 827413949
270 104708409 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 0.04 inch inclusive, of a width of 9.25 inches From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 827413949
271 104708409 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, annealed, of a thickness from up to 0.09 inch inclusive, of a width of 6.97 inches From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 827413949
272 104708409 Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 0.08 inch inclusive, of a width of 8.35 inches From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 827413949
273 102466950 Aluminum sheet of alloy 2024, 2219, 5052, 6013, 6061 or 7075, of a thickness from 0.012 inch to 0.2 inch inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
274 102466950 Aluminum plate of alloy 2024, 6061, 7050, 7075 or 7475, of a thickness from 0.25 inch to 5 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
275 102466950 Aluminum bar, of alloy 2024, 6061 or 7075, of a cross-section of 0.5 inch to 3 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
276 102466950 Aluminum extrusion of alloy 2024, 2219, 6061, 7075 or 7150 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
277 102466950 Aluminum rivets, screws, bolts, nuts and similar articles, of alloy 2024 or 6061 From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
278 102466950 Flat-rolled product, cold-rolled, of grade 301, 302, 321, 347, 4130, 15-5PH, 17-7PH, 17-4PH or A289, of a thickness from 0.018 inch to 0.128 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
279 102466950 Bars and rods, of grade 303, 304, 4340 or 17-4PH, of a cross-section from 0.625 inch to 1.75 inches inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
280 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1035 spheroidized and annealed, of a thickness from 0.0984 inch to 0.126 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
281 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1050 spheroidized and annealed, of a thickness from 0.0984 inch to 0.122 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
282 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification NES M2021 SP231-440, of a thickness from 0.0748 inch to 0.0866 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
283 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification SAEJ1392 050XF or SAEJ1392 550XF, of a thickness from 0.0551 inch to 0.063 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
284 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification MS-264 080XF, of a thickness from 0.0984 inch to 0.1063 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
285 104708409 Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification Toyota TSG31016 SPH440-OD, of a thickness from 0.0866 inch to 0.0945 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 896543659
286 101865749 Flat-rolled product, of specification LAC240Y320T GI 60/60 U, of a nominal thickness of 2.2 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
287 101865749 Flat-rolled product, of specification LAH240Y320T GI 60/60 U, of a nominal thickness of 1.8 mm or 3 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
288 101865749 Flat-rolled product, of specification LAC340Y410T GI 60/60 U, of a nominal thickness of 1.8 mm or 2.2 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
289 101865749 Flat-rolled product, of specification LAH340Y410T GI 60/60 U, of a nominal thickness of 3 mm or 4 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
290 101865749 Flat-rolled product, of specification LAH550Y620T GI 60/60 U, of a nominal thickness of 3 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
291 104708409 Flat-rolled product, hot-rolled, of specification SAE J2340 420 XF, of a thickness from 0.165 inch to 0.1731 inch inclusive From July 1, 2018 to June 30, 2019 inclusive Goods imported for sale to company with business number 867203804
292 104708409 Flat-rolled product, hot-rolled, of specification WSS-M1A346 Grade A5, of a thickness from 0.1397 inch to 0.1437 inch inclusive From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
293 867888109 Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7010, 7040, 7050, 7055, 7075, 7150, 7175 or 7474), of a thickness exceeding 0.2 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
294 867888109 Aluminum castings, angles, shims, forge or sheets to be cut into shims From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
295 867888109 Other articles of aluminum, including bolts, rivets or washers, of a kind used in aerospace application From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
296 868088089 Special bar quality (SBQ) carbon steel bar, in coils, of grade AISI 1536, 3130, 4120, 4320 or 4330, of a diameter from 0.8125 inch to 1.125 inches inclusive From July 1, 2018 to May 20, 2019 inclusive  
297 881231807 Flat-rolled product, hot-rolled, in coils, of specification TSG 3101G SPH590-OD, of a nominal thickness of 2.6 mm, of a width of 1,201 mm From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
298 119457869 Carbon steel pipe, longitudinally welded, of an outside diameter of 41 inches, 48 inches or 53 inches, of a length of 40 feet, conforming to standard AWWA C200 For goods imported on and after July 1, 2018 Goods purchased under Request for Supplier Qualifications No. 18-016
299 122791510 Flat-rolled product, of specification 50001-PHS950Y1300T, of a nominal thickness of 0.0475 inch or 0.0625 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
300 122791510 Flat-rolled product, of specification 50002-LAC340Y410T, of a nominal thickness of 0.0475 inch, 0.059 inch or 0.079 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
301 122791510 Flat-rolled product, of specification 50002-LAH550Y620T, of a nominal thickness of 0.1185 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
302 122791510 Flat-rolled product, of specification 50002-CR01, of a nominal thickness of 0.0585 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
303 122791510 Flat-rolled product, of specification 50002-LAC240Y320T, of a nominal thickness of 0.0585 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
304 122791510 Flat-rolled product, of specification 50002-DPC420Y780T, of a nominal thickness of 0.0475 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
305 122791510 Flat-rolled product, of iron, non-alloy or other alloy steel, aluminized boron, of a nominal thickness of 0.0625 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
306 122791510 Flat-rolled product, of specification GN 50XK, of a nominal thickness of 0.122 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
307 737270728 Tube or hollow profile, welded, of circular cross-section, of other alloy steel From July 1, 2018 to December 31, 2018 inclusive For imports recorded under one of the following transaction numbers (B3-3 Form):
16717206170456
16717206175861
16717206175974
16717206195091
16717206199040
16717206199197
16717206207950
16717206226247
16717206226326
308 896543659RM0014 Flat-rolled product, of other alloy steel, hot-rolled, pickled and oiled, of grade SAE J1392-050 YHF, of a thickness of 0.118 inch or 0.124 inch From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
309 817313737 Aluminum profiles, aluminum doors, windows and their frames, or cloth, grill, netting and fencing, of aluminum wire For goods imported on and after July 1, 2018 For imports recorded under one of the following transaction numbers (B3-3 Form):
13292934658174
13292934713923
13292934863981
13292934946526
13292935295748
13292935357242
13292935407173
13292936106466
310 859363764 Bar and rod, in coils, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive For goods imported on and after July 1, 2018 For use in the manufacture of original equipment parts or other parts
311 104040183 Bar and rod, of specification A36 or A529, of grade 50, 44W or 50 W, of a diameter of 0.75 inch, 1 inch or 1.25 inch For goods imported on and after July 1, 2018 Goods imported for sale to company with business number 119382679
312 124108564 Flat-rolled product of iron, non-alloy steel or other alloy steel, hot-rolled, of grade DQSK, JSH270C, JSH440W or JSH590R From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
313 124108564 Flat-rolled product of iron, non-alloy steel or other alloy steel, cold-rolled, of grade CRDF140T, DF140, DQSK, JSC270C, JSC 270F, JSC440W, JSC590R, JSC780Y or JSC980YL From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
314 124108564 Flat-rolled product of iron, non-alloy steel or other alloy steel, galvannealed, of grade JAC270C, JAC270D, JAC270E, JAC270F, JAC340H, JAC440W, JAC570C, JAC590R, JAC590Y, JAC780T, JAC780Y, JAC980YL or  JAH440W From July 1, 2018 to June 30, 2019 inclusive For use in the manufacture of original equipment parts or other parts
315 890975758 Round bar, of grade C1045, of a diameter from 1.5 inches to 3.5 inches inclusive, turned, ground and polished (TG&P) For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
316 890975758 Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.75 inch For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
317 132644584 Aluminum profiles, produced by an impact extrusion process, of alloy 6061-T6, of an outside diameter of up to 55 mm, of a wall thickness from 3.5 mm to 5.5 mm inclusive For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
318 780854485 Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inch to 1.5 inches inclusive, and of a length from 25 feet to 30.2 feet inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
319 103430336 or 856874649 Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.25 inch, of a width of 1 inch or 1.25 inches For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
320 103430336 or 856874649 Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.375 inch, of a width of 1.25 inches, 1.5 inches, 1.75 inches, 2.25 inches or 2.375 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
321 103430336 or 856874649 Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.5 inch, of a width of 2 inches or 2.5 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
322 103430336 or 856874649 Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.625 inch, of a width of 2 inches or 2.5 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
323 103430336 or 856874649 Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.1875 inch, of a width of 2.5 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
324 103430336 or 856874649 Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.5 inch, of a width of 2 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
325 103430336 or 856874649 Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.75 inch, of a width of 3 inches or 4 inches  For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
326 103430336 or 856874649 Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 1 inch, of a width of 3 inches, 4 inches or 6 inches For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
327 103430336 or 856874649 Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 2 inches, of a width of 3 inches For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
328 103430336 or 856874649 Round bar, hot-rolled, of grade AISI 1526 or 1527, of a diameter of 0.75 inch, 0.875 inch or 1 inch For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
329 131695603 Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, of specification GMW3032M-ST-S HR340LA, GMW3032M-ST-S HR550LA, SAE J2340 340XF or SAE J2340 550XF From July 1, 2018 to December 31, 2018 For use in the manufacture of original equipment parts or other parts
330 131695603 Flat-rolled product, of iron or non-alloy steel, in coils, cold-rolled, of specification GMW3032M-ST-S CR340LA or GMW3032M-ST-S CR420LA From July 1, 2018 to December 31, 2018 For use in the manufacture of original equipment parts or other parts
331 753425081 Bar, round, of stainless steel, of grade A286, of specification AMS 5732 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
332 753425081 Bar, round or hexagonal, of stainless steel, of grade 321, of specification AMS 5645 or QQ-S-763 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
333 753425081 Bar, round, of stainless steel, of grade 304, of specification AMS 5639 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
334 753425081 Bar, round, of stainless steel, of grade 303 or 303Se, of specification ASTM A582, AMS 5641 or AMS 5738 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
335 753425081 Bar, round, of stainless steel, of grade 302, of specification MIL-S-7720 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
336 753425081 Bar, round, of other alloy steel, of grade 4340, of specification AMS 6414 or AMS 6415 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
337 753425081 Bar, round, of other alloy steel, of grade 4130, of specification AMS 6348 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
338 753425081 Bar, round, of other alloy steel, of grade 4140, of specification AMS 6382, AMS 6349 or AMS-S-5626 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
339 753425081 Tube, of other alloy steel, of grade 4130, of specification AMS 6360 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
340 753425081 Flat-rolled product, of other alloy steel, of grade 4130, of specification AMS 6345 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
341 102251972 Tube, seamless or electric resistance welded, of grade L80, of an outside diameter of 2.875 inches From July 1, 2018 to May 20, 2019  
342 710327693 Flat-rolled product of grade 350 AT, of specification CSA G40.21 From July 1, 2018 to December 31, 2018 inclusive For imports recorded under the transaction number 12997231584049 (B3-3 Form)
343 866460074 Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 1035, 1045 or 1050,  of a width from 33  mm to 246 mm inclusive, of a thickness from 2.9 mm to 7.1 mm inclusive For goods imported on or after July 1, 2018 For use in the manufacture of original equipment parts or other parts
344 122016587 Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
345 122016587 Bar of stainless steel, round or rectangular, of grade 15-5PH, of specification AMS 5659 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
346 122016587 Flat-rolled product, hot-rolled, of grade 4130, of a thickness of 0.09 inch, of a width of 36 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
347 122016587 Flat-rolled product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
348 122016587 Bar, hot-rolled, of grade 4340, of specification AMS 6415, of a diameter of 3.5 inches, 5.25 inches or 5.5 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
349 122016587 Aluminum bar, round, annealed, of specification AMS 4000 or 4102, of a diameter of 0.4375 inch From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
350 889457701 Bar and rod, of grade 8620, of a diameter from 4.25 inches to 7 inches inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
351 107388720 Coded fish tag of stainless steel, of dimensions of 1.1 mm by 0.25 mm For goods imported on or after July 1, 2018  
352 119354884 Sections of iron or non-alloy steel, hot-rolled, of grade 1012, of specification ASTM A-576, of a width of 5.5 inches or more, of a length of 18 feet or more From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
353 102251972 Tube, of non-alloy or alloy steel, seamless, of specification A.P.I. L80,C90, T95 or P110, of an outside diameter greater from 60.32 mm to 114.3 mm inclusive From July 1, 2018 to May 20, 2019  
354 102251972 High strength sour service casing, of specification A.P.I. Grade C90, T95, C110 or equivalent proprietary specification, of an outside diameter from 114.3 mm to 244.5 mm inclusive From July 1, 2018 to May 20, 2019  
355 102251972 Tube, of non-alloy or alloy steel, of specification A.P.I. L80 or P110, of an outside diameter from 60.32 mm to 114.3 mm inclusive From July 1, 2018 to May 20, 2019  
356 102963790 Rectangular welded tube, of specification SAE 1008/1010 ASTM A513, of a wall thickness of 0.042 inch, of dimensions of 0.75 inch by 1 inch by 9.2 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
357 106234289 Hollow core aluminum extrusion, of alloy 6005A or 6061 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
358 106234289 Flat-rolled product, welded, consisting of an aluminum sheet of alloy 5083 and a steel sheet of grade Q345 From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
359 106234289 Aluminum bar, of alloy 6061, of a width of 12.1 inches, of a height of 3.725 inches, of a length of 74.25 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
360 140515958 Aluminum profile, not hollow, of alloy 6063-T5, of a diameter of up to 0.332 inch inclusive, consisting of three or five blades From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
361 100770320 Aluminum bars, rods and profiles, of aluminum alloy of the 6000 series, of a nominal wall thickness from 0.03 inch to 0.1 inch From July 1, 2018 to May 20, 2019  
362 890975758 Flat-rolled products, bars, rods, angles, shapes, sections, tubes, pipes or hollow profiles, of non-alloy or alloy steel From March 19, 2019 to May 20, 2019 For use in the manufacturing of agricultural equipment and transferred from UND 58703 location
363 856874649 Bar, of grade 400W, of metric bar size 10M, 15M, 20M, 25M or 30M From July 1, 2018 to May 20, 2019 Goods imported for sale to company with business number 103605371 and ordered under purchase order number 663057 or 18-11017
364 856874649 Bar, of grade 50, of a diameter of 0.625 inch or 0.875 inch From July 1, 2018 to May 20, 2019 Goods imported for sale to company with business number 103605371 and ordered under purchase order number 18-11017 or 18-12005
365 811893296 Flat-rolled product, in coils, galvannealed, of grade Prime Deep Drawing Quality (DDQ) or Prime Extra Deep Drawing Quality (EDDQ), of a  thickness from 0.0449 inch to 0.048 inch inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of parts
366 101087963 Parts for fireplace, classified under tariff item 7304.51.00, 7306.90.00, 7321.90.10, 7321.90.23, 7321.90.90 or 7616.99.90 From July 1, 2018 to May 20, 2019 Parts sold by Hearth & Home Technologies
367 104613658 Grouser bar, merchant bar quality (MBQ), hot rolled, of grade 1070, of Rockwell hardness of 25 to 30 From July 1, 2018 to May 20, 2019  
368 104708409 Hot-rolled black carbon steel plate, of specification ASTM A572-50 modified, of a thickness from 0.3125 inch to 0.5625 inch, of a width of 96 inches, of a length of 312 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
369 104708409 Hot-rolled black carbon steel plate, of specification ASTM A36 modified, ABS Grade A, of a thickness from 0.25 inch to 0.5 inch, of a width of 96 inches, of a length of 312 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
370 101131027 Flat-rolled product of iron or non-alloy steel, of structural steel Grade 33, in-line tension levelled (max shape of less than 15 I-units), galvanized to specification HDG G90, of a width of 48 inches, of a minimum thickness from 0.018 inch to 0.0235 inch inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of parts
371 104708409 Flat-rolled product, not further worked than cold-rolled, in coils, of specification SAE J403, of grade 1010, of a thickness of 0.018 inch or 0.02 inch, of a width of 42 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
372 104546718  Flat-rolled product, cold-rolled, galvanized, of grade HSLA 420LA, of a nominal thickness of 0.098 inch, of a width of more than 50 inches From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
373 104546718  Flat-rolled product, galvanized, of specification GMW3032M-ST-S-500LA, of a thickness of 0.045 inch or more From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
374 794117093 Flat-rolled product, hot-rolled, of trademarked grade HSLA TuffDOM 620, alloyed with vanadium, of a minimum thickness of 0.342 inch, 0.362 inch, 0.394 inch or 0.416 inch From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
375 794117093 Flat-rolled product, hot-rolled, of grade HSLA 70XF, alloyed with vanadium, of a minimum thickness of 0.13 inch From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
376 780318317 Flat-rolled product, in coils, cold-rolled, of specification HFT 440 or HFT 590, of a thickness of 1.2 mm or 1.73 mm From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
377 780318317 Flat-rolled product, in coils, cold-rolled, of specification DI-FORM 140T, DEV DI-FORM T590, DEV DI-FORM T1180 or DEV DI-FORM T980Y600, of a thickness from 0.8 mm to 2 mm  inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
378 780318317 Flat-rolled product, in coils, cold-rolled, of specification TSG3100G SPC590DU, of a thickness from 1.2 mm to 1.8 mm inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
379 780318317 Flat-rolled product, hot-rolled or cold-rolled, galvannealed of specification TSG3109G SCGA590DU, TSG 3109G SCGA780DU, TSG 3109G SCGA980DUB or TSG SCGA1190DUB,  of a thickness from 1 mm to 2.3 mm inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
380 780318317 Flat-rolled product, hot-rolled or cold-rolled, galvannealed, of grade Extra Deep Drawing Steel (EDDS), of a thickness from 0.6 mm to 0.8 mm inclusive From July 1, 2018 to May 20, 2019 For use in the manufacture of original equipment parts or other parts
Schedule 4 of the Remission Order
Item Tariff Item Description of Goods
1 4412.39.00 Other, with both outer plies of coniferous wood, for use in Canadian manufactures
2 4811.59.00 Other, for use in Canadian manufactures
3 8903.10.00 Inflatable
4 8903.91.00 Sailboats, with or without auxiliary motor
5 8903.92.00 Motorboats, other than outboard motorboats
6 8903.99.90 Other
7 9404.21.00 Of cellular rubber or plastics, whether or not covered, for use in Canadian manufactures
8 3923.21.90 Other, for use in Canadian manufactures
9 3923.29.90 Other, for use in Canadian manufactures
10 1602.50.99 Other, for use in Canadian manufactures
11 4412.99.90 Other, for use in Canadian manufactures